https://www.coreboot.org/api.php?action=feedcontributions&user=Mgold&feedformat=atom
coreboot - User contributions [en]
2024-03-28T19:55:32Z
User contributions
MediaWiki 1.40.0
https://www.coreboot.org/index.php?title=ACPI&diff=8835
ACPI
2009-07-16T23:35:31Z
<p>Mgold: /* Set up hardware */ grammar</p>
<hr />
<div></div>
Mgold
https://www.coreboot.org/index.php?title=ACPI&diff=8834
ACPI
2009-07-16T23:33:16Z
<p>Mgold: grammar</p>
<hr />
<div></div>
Mgold
https://www.coreboot.org/index.php?title=Board:mitac/6513wu&diff=8833
Board:mitac/6513wu
2009-07-16T02:11:42Z
<p>Mgold: mark RNG as OK, ECC and dual-channel RAM as N/A</p>
<hr />
<div>[[File:mitac-6513wu.jpeg|thumb|right|Mitac 6513WU mainboard]]<br />
<br />
This page describes how to use coreboot on the [http://www.motherboards.org/files/manuals/78/6513WU.pdf Mitac 6513WU] board.<br />
<br />
A sample [http://www.coreboot.org/pipermail/coreboot/2009-July/050525.html boot log] of the board running coreboot is available.<br />
<br />
== Status ==<br />
<br />
{{Status|<br />
<br />
|CPU_status = OK<br />
|CPU_L1_status = OK<br />
|CPU_L1_comments = <br />
|CPU_L2_status = OK<br />
|CPU_L3_status = N/A<br />
|CPU_multiple_status = N/A<br />
|CPU_multicore_status = N/A<br />
|CPU_virt_status = N/A<br />
<br />
|RAM_EDO_status = N/A<br />
|RAM_SDRAM_status = WIP<br />
|RAM_SDRAM_comments = Works with a double-sided 256 MB DIMM (Infineon HYS64V32220GU-7-C2). Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.<br />
|RAM_SODIMM_status = N/A<br />
|RAM_DDR_status = N/A<br />
|RAM_DDR2_status = N/A<br />
|RAM_DDR3_status = N/A<br />
|RAM_dualchannel_status = N/A<br />
|RAM_ecc_status = N/A<br />
<br />
|IDE_status = OK<br />
|IDE_25_status = N/A<br />
|SATA_status = N/A<br />
|USB_status = OK<br />
|USB_comments = <br />
|Onboard_VGA_status = Untested<br />
|Onboard_VGA_comments = Needs a [http://www.coreboot.org/pipermail/coreboot/2009-July/050497.html small patch] for now (?)<br />
|Onboard_ethernet_status = N/A<br />
|Onboard_audio_status = <br />
|Onboard_modem_status = N/A<br />
|Onboard_firewire_status = N/A<br />
|Smartcard_status = N/A<br />
|Onboard_CF_status = N/A<br />
|Onboard_PCMCIA_status = N/A<br />
|Onboard_SCSI_status = N/A<br />
<br />
|ISA_cards_status = N/A<br />
|AMR_cards_status = N/A<br />
|Mini_PCI_cards_status = N/A<br />
|PCIX_cards_status = N/A<br />
|AGP_cards_status = N/A<br />
|PCI_cards_status = OK<br />
|PCI_cards_comments = Tested slots PCI2, PCI4 (numbered from edge of board)<br />
|PCIX_cards_status = N/A<br />
|PCIE_x1_status = N/A<br />
|PCIE_x2_status = N/A<br />
|PCIE_x4_status = N/A<br />
|PCIE_x8_status = N/A<br />
|PCIE_x16_status = N/A<br />
|PCIE_x32_status = N/A<br />
|HTX_status = N/A<br />
<br />
|Floppy_status = Untested<br />
|COM1_status = OK<br />
|COM2_status = N/A<br />
|PP_status = OK<br />
|PP_comments = <br />
|PS2_keyboard_status = Untested<br />
|PS2_mouse_status = Untested<br />
|Game_port_status = Untested<br />
|Game_port_comments = <br />
|IR_status = N/A<br />
|Speaker_status = N/A<br />
|Speaker_comments = <br />
|DiskOnChip_status = N/A<br />
<br />
|Sensors_status = <br />
|Sensors_comments = <br />
|Watchdog_status = <br />
|Watchdog_comments = <br />
|SMBus_status = <br />
|CAN_bus_status = N/A<br />
|CPUfreq_status = Untested<br />
|Powersave_status = N/A<br />
|ACPI_status = No<br />
|ACPI_comments = There is no ACPI implementation for this board, yet.<br />
|Reboot_status = OK<br />
|Poweroff_status = No<br />
|Poweroff_comments = Probably needs ACPI in order to work.<br />
|LEDs_status = N/A<br />
|HPET_status = <br />
|RNG_status = OK<br />
|WakeOnModem_status = Untested<br />
|WakeOnLAN_status = Untested<br />
|WakeOnKeyboard_status = Untested<br />
|WakeOnMouse_status = Untested<br />
|Smartcard_status = N/A<br />
|Flashrom_status = OK<br />
|Flashrom_comments = <br />
<br />
}}<br />
<br />
== Hardware ==<br />
<br />
'''lspci -tvnn'''<br />
<br />
-[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br />
+-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller<br />
+-1e.0-[0000:01]--+-05.0 ESS Technology ES1988 Allegro-1<br />
| +-09.0 Advanced Micro Devices [AMD] 79c978 [HomePNA]<br />
| \-0a.0 PCTel Inc HSP MicroModem 56<br />
+-1f.0 Intel Corporation 82801AA ISA Bridge (LPC)<br />
+-1f.1 Intel Corporation 82801AA IDE Controller<br />
+-1f.2 Intel Corporation 82801AA USB Controller<br />
\-1f.3 Intel Corporation 82801AA SMBus Controller<br />
<br />
== Building coreboot ==<br />
<br />
$ svn co svn://coreboot.org/repos/trunk/coreboot-v2<br />
$ cd coreboot-v2/targets<br />
$ ./buildtarget mitac/6513wu<br />
$ cd mitac/6513wu/6513wu<br />
<br />
Now copy your desired [[Payloads|payload]] into the current directory and name it '''payload.elf'''. Then:<br />
<br />
$ make<br />
<br />
Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:<br />
<br />
$ cat ''vga.bin'' coreboot.rom > coreboot_final.rom<br />
<br />
(replace ''vga.bin'' with the file name of your VGA BIOS image)<br />
<br />
You can now flash the resulting '''coreboot_final.rom''' on a ROM chip using [[Flashrom]].<br />
<br />
<br />
{{PD-self}}</div>
Mgold
https://www.coreboot.org/index.php?title=Board:mitac/6513wu&diff=8832
Board:mitac/6513wu
2009-07-16T01:42:35Z
<p>Mgold: more status updates</p>
<hr />
<div>[[File:mitac-6513wu.jpeg|thumb|right|Mitac 6513WU mainboard]]<br />
<br />
This page describes how to use coreboot on the [http://www.motherboards.org/files/manuals/78/6513WU.pdf Mitac 6513WU] board.<br />
<br />
A sample [http://www.coreboot.org/pipermail/coreboot/2009-July/050525.html boot log] of the board running coreboot is available.<br />
<br />
== Status ==<br />
<br />
{{Status|<br />
<br />
|CPU_status = OK<br />
|CPU_L1_status = OK<br />
|CPU_L1_comments = <br />
|CPU_L2_status = OK<br />
|CPU_L3_status = N/A<br />
|CPU_multiple_status = N/A<br />
|CPU_multicore_status = N/A<br />
|CPU_virt_status = N/A<br />
<br />
|RAM_EDO_status = N/A<br />
|RAM_SDRAM_status = WIP<br />
|RAM_SDRAM_comments = Works with a double-sided 256 MB DIMM (Infineon HYS64V32220GU-7-C2). Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.<br />
|RAM_SODIMM_status = N/A<br />
|RAM_DDR_status = N/A<br />
|RAM_DDR2_status = N/A<br />
|RAM_DDR3_status = N/A<br />
|RAM_dualchannel_status = <br />
|RAM_ecc_status = <br />
<br />
|IDE_status = OK<br />
|IDE_25_status = N/A<br />
|SATA_status = N/A<br />
|USB_status = OK<br />
|USB_comments = <br />
|Onboard_VGA_status = Untested<br />
|Onboard_VGA_comments = Needs a [http://www.coreboot.org/pipermail/coreboot/2009-July/050497.html small patch] for now (?)<br />
|Onboard_ethernet_status = N/A<br />
|Onboard_audio_status = <br />
|Onboard_modem_status = N/A<br />
|Onboard_firewire_status = N/A<br />
|Smartcard_status = N/A<br />
|Onboard_CF_status = N/A<br />
|Onboard_PCMCIA_status = N/A<br />
|Onboard_SCSI_status = N/A<br />
<br />
|ISA_cards_status = N/A<br />
|AMR_cards_status = N/A<br />
|Mini_PCI_cards_status = N/A<br />
|PCIX_cards_status = N/A<br />
|AGP_cards_status = N/A<br />
|PCI_cards_status = OK<br />
|PCI_cards_comments = Tested slots PCI2, PCI4 (numbered from edge of board)<br />
|PCIX_cards_status = N/A<br />
|PCIE_x1_status = N/A<br />
|PCIE_x2_status = N/A<br />
|PCIE_x4_status = N/A<br />
|PCIE_x8_status = N/A<br />
|PCIE_x16_status = N/A<br />
|PCIE_x32_status = N/A<br />
|HTX_status = N/A<br />
<br />
|Floppy_status = Untested<br />
|COM1_status = OK<br />
|COM2_status = N/A<br />
|PP_status = OK<br />
|PP_comments = <br />
|PS2_keyboard_status = <br />
|PS2_mouse_status = <br />
|Game_port_status = <br />
|Game_port_comments = <br />
|IR_status = N/A<br />
|Speaker_status = N/A<br />
|Speaker_comments = <br />
|DiskOnChip_status = N/A<br />
<br />
|Sensors_status = <br />
|Sensors_comments = <br />
|Watchdog_status = <br />
|Watchdog_comments = <br />
|SMBus_status = <br />
|CAN_bus_status = N/A<br />
|CPUfreq_status = Untested<br />
|Powersave_status = N/A<br />
|ACPI_status = No<br />
|ACPI_comments = There is no ACPI implementation for this board, yet.<br />
|Reboot_status = OK<br />
|Poweroff_status = No<br />
|Poweroff_comments = Probably needs ACPI in order to work.<br />
|LEDs_status = N/A<br />
|HPET_status = <br />
|RNG_status = <br />
|WakeOnModem_status = Untested<br />
|WakeOnLAN_status = Untested<br />
|WakeOnKeyboard_status = Untested<br />
|WakeOnMouse_status = Untested<br />
|Smartcard_status = N/A<br />
|Flashrom_status = OK<br />
|Flashrom_comments = <br />
<br />
}}<br />
<br />
== Hardware ==<br />
<br />
'''lspci -tvnn'''<br />
<br />
-[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br />
+-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller<br />
+-1e.0-[0000:01]--+-05.0 ESS Technology ES1988 Allegro-1<br />
| +-09.0 Advanced Micro Devices [AMD] 79c978 [HomePNA]<br />
| \-0a.0 PCTel Inc HSP MicroModem 56<br />
+-1f.0 Intel Corporation 82801AA ISA Bridge (LPC)<br />
+-1f.1 Intel Corporation 82801AA IDE Controller<br />
+-1f.2 Intel Corporation 82801AA USB Controller<br />
\-1f.3 Intel Corporation 82801AA SMBus Controller<br />
<br />
== Building coreboot ==<br />
<br />
$ svn co svn://coreboot.org/repos/trunk/coreboot-v2<br />
$ cd coreboot-v2/targets<br />
$ ./buildtarget mitac/6513wu<br />
$ cd mitac/6513wu/6513wu<br />
<br />
Now copy your desired [[Payloads|payload]] into the current directory and name it '''payload.elf'''. Then:<br />
<br />
$ make<br />
<br />
Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:<br />
<br />
$ cat ''vga.bin'' coreboot.rom > coreboot_final.rom<br />
<br />
(replace ''vga.bin'' with the file name of your VGA BIOS image)<br />
<br />
You can now flash the resulting '''coreboot_final.rom''' on a ROM chip using [[Flashrom]].<br />
<br />
<br />
{{PD-self}}</div>
Mgold
https://www.coreboot.org/index.php?title=Board:mitac/6513wu&diff=8831
Board:mitac/6513wu
2009-07-16T00:38:58Z
<p>Mgold: link to manual</p>
<hr />
<div>[[File:mitac-6513wu.jpeg|thumb|right|Mitac 6513WU mainboard]]<br />
<br />
This page describes how to use coreboot on the [http://www.motherboards.org/files/manuals/78/6513WU.pdf Mitac 6513WU] board.<br />
<br />
A sample [http://www.coreboot.org/pipermail/coreboot/2009-July/050525.html boot log] of the board running coreboot is available.<br />
<br />
== Status ==<br />
<br />
{{Status|<br />
<br />
|CPU_status = OK<br />
|CPU_L1_status = OK<br />
|CPU_L1_comments = <br />
|CPU_L2_status = OK<br />
|CPU_L3_status = N/A<br />
|CPU_multiple_status = N/A<br />
|CPU_multicore_status = N/A<br />
|CPU_virt_status = N/A<br />
<br />
|RAM_EDO_status = N/A<br />
|RAM_SDRAM_status = WIP<br />
|RAM_SDRAM_comments = Works with a double-sided 256 MB DIMM (Infineon HYS64V32220GU-7-C2). Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.<br />
|RAM_SODIMM_status = N/A<br />
|RAM_DDR_status = N/A<br />
|RAM_DDR2_status = N/A<br />
|RAM_DDR3_status = N/A<br />
|RAM_dualchannel_status = <br />
|RAM_ecc_status = <br />
<br />
|IDE_status = OK<br />
|IDE_25_status = N/A<br />
|SATA_status = N/A<br />
|USB_status = OK<br />
|USB_comments = <br />
|Onboard_VGA_status = Untested<br />
|Onboard_VGA_comments = Needs a [http://www.coreboot.org/pipermail/coreboot/2009-July/050497.html small patch] for now (?)<br />
|Onboard_ethernet_status = N/A<br />
|Onboard_audio_status = <br />
|Onboard_modem_status = N/A<br />
|Onboard_firewire_status = N/A<br />
|Smartcard_status = N/A<br />
|Onboard_CF_status = N/A<br />
|Onboard_PCMCIA_status = N/A<br />
|Onboard_SCSI_status = N/A<br />
<br />
|ISA_cards_status = N/A<br />
|AMR_cards_status = <br />
|Mini_PCI_cards_status = N/A<br />
|PCIX_cards_status = N/A<br />
|AGP_cards_status = N/A<br />
|PCI_cards_status = OK<br />
|PCI_cards_comments = Tested slots PCI2, PCI4 (numbered from edge of board)<br />
|PCIX_cards_status = N/A<br />
|PCIE_x1_status = N/A<br />
|PCIE_x2_status = N/A<br />
|PCIE_x4_status = N/A<br />
|PCIE_x8_status = N/A<br />
|PCIE_x16_status = N/A<br />
|PCIE_x32_status = N/A<br />
|HTX_status = N/A<br />
<br />
|Floppy_status = Untested<br />
|COM1_status = OK<br />
|COM2_status = Untested<br />
|PP_status = <br />
|PP_comments = <br />
|PS2_keyboard_status = <br />
|PS2_mouse_status = <br />
|Game_port_status = <br />
|Game_port_comments = <br />
|IR_status = N/A<br />
|Speaker_status = N/A<br />
|Speaker_comments = <br />
|DiskOnChip_status = N/A<br />
<br />
|Sensors_status = <br />
|Sensors_comments = <br />
|Watchdog_status = <br />
|Watchdog_comments = <br />
|SMBus_status = N/A<br />
|CAN_bus_status = N/A<br />
|CPUfreq_status = Untested<br />
|Powersave_status = N/A<br />
|ACPI_status = No<br />
|ACPI_comments = There is no ACPI implementation for this board, yet.<br />
|Reboot_status = OK<br />
|Poweroff_status = No<br />
|Poweroff_comments = Probably needs ACPI in order to work.<br />
|LEDs_status = <br />
|HPET_status = <br />
|RNG_status = <br />
|WakeOnModem_status = Untested<br />
|WakeOnLAN_status = Untested<br />
|WakeOnKeyboard_status = Untested<br />
|WakeOnMouse_status = Untested<br />
|Smartcard_status = N/A<br />
|Flashrom_status = OK<br />
|Flashrom_comments = <br />
<br />
}}<br />
<br />
== Hardware ==<br />
<br />
'''lspci -tvnn'''<br />
<br />
-[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br />
+-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller<br />
+-1e.0-[0000:01]--+-05.0 ESS Technology ES1988 Allegro-1<br />
| +-09.0 Advanced Micro Devices [AMD] 79c978 [HomePNA]<br />
| \-0a.0 PCTel Inc HSP MicroModem 56<br />
+-1f.0 Intel Corporation 82801AA ISA Bridge (LPC)<br />
+-1f.1 Intel Corporation 82801AA IDE Controller<br />
+-1f.2 Intel Corporation 82801AA USB Controller<br />
\-1f.3 Intel Corporation 82801AA SMBus Controller<br />
<br />
== Building coreboot ==<br />
<br />
$ svn co svn://coreboot.org/repos/trunk/coreboot-v2<br />
$ cd coreboot-v2/targets<br />
$ ./buildtarget mitac/6513wu<br />
$ cd mitac/6513wu/6513wu<br />
<br />
Now copy your desired [[Payloads|payload]] into the current directory and name it '''payload.elf'''. Then:<br />
<br />
$ make<br />
<br />
Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:<br />
<br />
$ cat ''vga.bin'' coreboot.rom > coreboot_final.rom<br />
<br />
(replace ''vga.bin'' with the file name of your VGA BIOS image)<br />
<br />
You can now flash the resulting '''coreboot_final.rom''' on a ROM chip using [[Flashrom]].<br />
<br />
<br />
{{PD-self}}</div>
Mgold
https://www.coreboot.org/index.php?title=Board:mitac/6513wu&diff=8830
Board:mitac/6513wu
2009-07-16T00:26:57Z
<p>Mgold: update status</p>
<hr />
<div>[[File:mitac-6513wu.jpeg|thumb|right|Mitac 6513WU mainboard]]<br />
<br />
This page describes how to use coreboot on the [http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm Mitac 6513WU] board.<br />
<br />
A sample [http://www.coreboot.org/pipermail/coreboot/2009-July/050525.html boot log] of the board running coreboot is available.<br />
<br />
== Status ==<br />
<br />
{{Status|<br />
<br />
|CPU_status = OK<br />
|CPU_L1_status = OK<br />
|CPU_L1_comments = <br />
|CPU_L2_status = OK<br />
|CPU_L3_status = N/A<br />
|CPU_multiple_status = N/A<br />
|CPU_multicore_status = N/A<br />
|CPU_virt_status = N/A<br />
<br />
|RAM_EDO_status = N/A<br />
|RAM_SDRAM_status = WIP<br />
|RAM_SDRAM_comments = Works with a double-sided 256 MB DIMM (Infineon HYS64V32220GU-7-C2). Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.<br />
|RAM_SODIMM_status = N/A<br />
|RAM_DDR_status = N/A<br />
|RAM_DDR2_status = N/A<br />
|RAM_DDR3_status = N/A<br />
|RAM_dualchannel_status = <br />
|RAM_ecc_status = <br />
<br />
|IDE_status = OK<br />
|IDE_25_status = N/A<br />
|SATA_status = N/A<br />
|USB_status = OK<br />
|USB_comments = <br />
|Onboard_VGA_status = Untested<br />
|Onboard_VGA_comments = Needs a [http://www.coreboot.org/pipermail/coreboot/2009-July/050497.html small patch] for now (?)<br />
|Onboard_ethernet_status = N/A<br />
|Onboard_audio_status = <br />
|Onboard_modem_status = N/A<br />
|Onboard_firewire_status = N/A<br />
|Smartcard_status = N/A<br />
|Onboard_CF_status = N/A<br />
|Onboard_PCMCIA_status = N/A<br />
|Onboard_SCSI_status = N/A<br />
<br />
|ISA_cards_status = N/A<br />
|AMR_cards_status = <br />
|Mini_PCI_cards_status = N/A<br />
|PCIX_cards_status = N/A<br />
|AGP_cards_status = N/A<br />
|PCI_cards_status = OK<br />
|PCI_cards_comments = Tested slots PCI2, PCI4 (numbered from edge of board)<br />
|PCIX_cards_status = N/A<br />
|PCIE_x1_status = N/A<br />
|PCIE_x2_status = N/A<br />
|PCIE_x4_status = N/A<br />
|PCIE_x8_status = N/A<br />
|PCIE_x16_status = N/A<br />
|PCIE_x32_status = N/A<br />
|HTX_status = N/A<br />
<br />
|Floppy_status = Untested<br />
|COM1_status = OK<br />
|COM2_status = Untested<br />
|PP_status = <br />
|PP_comments = <br />
|PS2_keyboard_status = <br />
|PS2_mouse_status = <br />
|Game_port_status = <br />
|Game_port_comments = <br />
|IR_status = N/A<br />
|Speaker_status = N/A<br />
|Speaker_comments = <br />
|DiskOnChip_status = N/A<br />
<br />
|Sensors_status = <br />
|Sensors_comments = <br />
|Watchdog_status = <br />
|Watchdog_comments = <br />
|SMBus_status = N/A<br />
|CAN_bus_status = N/A<br />
|CPUfreq_status = Untested<br />
|Powersave_status = N/A<br />
|ACPI_status = No<br />
|ACPI_comments = There is no ACPI implementation for this board, yet.<br />
|Reboot_status = OK<br />
|Poweroff_status = No<br />
|Poweroff_comments = Probably needs ACPI in order to work.<br />
|LEDs_status = <br />
|HPET_status = <br />
|RNG_status = <br />
|WakeOnModem_status = Untested<br />
|WakeOnLAN_status = Untested<br />
|WakeOnKeyboard_status = Untested<br />
|WakeOnMouse_status = Untested<br />
|Smartcard_status = N/A<br />
|Flashrom_status = OK<br />
|Flashrom_comments = <br />
<br />
}}<br />
<br />
== Hardware ==<br />
<br />
'''lspci -tvnn'''<br />
<br />
-[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br />
+-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller<br />
+-1e.0-[0000:01]--+-05.0 ESS Technology ES1988 Allegro-1<br />
| +-09.0 Advanced Micro Devices [AMD] 79c978 [HomePNA]<br />
| \-0a.0 PCTel Inc HSP MicroModem 56<br />
+-1f.0 Intel Corporation 82801AA ISA Bridge (LPC)<br />
+-1f.1 Intel Corporation 82801AA IDE Controller<br />
+-1f.2 Intel Corporation 82801AA USB Controller<br />
\-1f.3 Intel Corporation 82801AA SMBus Controller<br />
<br />
== Building coreboot ==<br />
<br />
$ svn co svn://coreboot.org/repos/trunk/coreboot-v2<br />
$ cd coreboot-v2/targets<br />
$ ./buildtarget mitac/6513wu<br />
$ cd mitac/6513wu/6513wu<br />
<br />
Now copy your desired [[Payloads|payload]] into the current directory and name it '''payload.elf'''. Then:<br />
<br />
$ make<br />
<br />
Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:<br />
<br />
$ cat ''vga.bin'' coreboot.rom > coreboot_final.rom<br />
<br />
(replace ''vga.bin'' with the file name of your VGA BIOS image)<br />
<br />
You can now flash the resulting '''coreboot_final.rom''' on a ROM chip using [[Flashrom]].<br />
<br />
<br />
{{PD-self}}</div>
Mgold
https://www.coreboot.org/index.php?title=Board:mitac/6513wu&diff=8829
Board:mitac/6513wu
2009-07-15T23:50:43Z
<p>Mgold: add image</p>
<hr />
<div>[[File:mitac-6513wu.jpeg|thumb|right|Mitac 6513WU mainboard]]<br />
<br />
This page describes how to use coreboot on the [http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm Mitac 6513WU] board.<br />
<br />
A sample [http://www.coreboot.org/pipermail/coreboot/2009-July/050525.html boot log] of the board running coreboot is available.<br />
<br />
== Status ==<br />
<br />
{{Status|<br />
<br />
|CPU_status = <br />
|CPU_L1_status = <br />
|CPU_L1_comments = <br />
|CPU_L2_status = <br />
|CPU_L3_status = <br />
|CPU_multiple_status = N/A<br />
|CPU_multicore_status = N/A<br />
|CPU_virt_status = N/A<br />
<br />
|RAM_EDO_status = N/A<br />
|RAM_SDRAM_status = WIP<br />
|RAM_SDRAM_comments = Single-sided DIMMs in slot 0 should work fine. Other combinations may or may not work, this is WIP.<br />
|RAM_SODIMM_status = N/A<br />
|RAM_DDR_status = N/A<br />
|RAM_DDR2_status = N/A<br />
|RAM_DDR3_status = N/A<br />
|RAM_dualchannel_status = <br />
|RAM_ecc_status = <br />
<br />
|IDE_status = <br />
|IDE_25_status = N/A<br />
|SATA_status = N/A<br />
|USB_status = <br />
|USB_comments = <br />
|Onboard_VGA_status = Untested<br />
|Onboard_VGA_comments = Needs a [http://www.coreboot.org/pipermail/coreboot/2009-July/050497.html small patch] for now (?)<br />
|Onboard_ethernet_status = N/A<br />
|Onboard_audio_status = <br />
|Onboard_modem_status = Untested<br />
|Onboard_firewire_status = N/A<br />
|Smartcard_status = N/A<br />
|Onboard_CF_status = N/A<br />
|Onboard_PCMCIA_status = N/A<br />
|Onboard_SCSI_status = N/A<br />
<br />
|ISA_cards_status = N/A<br />
|AMR_cards_status = <br />
|Mini_PCI_cards_status = N/A<br />
|PCIX_cards_status = N/A<br />
|AGP_cards_status = N/A<br />
|PCI_cards_status = <br />
|PCI_cards_comments = <br />
|PCIX_cards_status = N/A<br />
|PCIE_x1_status = N/A<br />
|PCIE_x2_status = N/A<br />
|PCIE_x4_status = N/A<br />
|PCIE_x8_status = N/A<br />
|PCIE_x16_status = N/A<br />
|PCIE_x32_status = N/A<br />
|HTX_status = N/A<br />
<br />
|Floppy_status = Untested<br />
|COM1_status = <br />
|COM2_status = Untested<br />
|PP_status = <br />
|PP_comments = <br />
|PS2_keyboard_status = <br />
|PS2_mouse_status = <br />
|Game_port_status = <br />
|Game_port_comments = <br />
|IR_status = <br />
|Speaker_status = <br />
|Speaker_comments = <br />
|DiskOnChip_status = N/A<br />
<br />
|Sensors_status = <br />
|Sensors_comments = <br />
|Watchdog_status = <br />
|Watchdog_comments = <br />
|SMBus_status = N/A<br />
|CAN_bus_status = N/A<br />
|CPUfreq_status = Untested<br />
|Powersave_status = N/A<br />
|ACPI_status = No<br />
|ACPI_comments = There is no ACPI implementation for this board, yet.<br />
|Reboot_status = <br />
|Poweroff_status = <br />
|Poweroff_comments = Probably needs ACPI in order to work.<br />
|LEDs_status = <br />
|HPET_status = <br />
|RNG_status = <br />
|WakeOnModem_status = Untested<br />
|WakeOnLAN_status = Untested<br />
|WakeOnKeyboard_status = Untested<br />
|WakeOnMouse_status = Untested<br />
|Smartcard_status = N/A<br />
|Flashrom_status = <br />
|Flashrom_comments = <br />
<br />
}}<br />
<br />
== Hardware ==<br />
<br />
'''lspci -tvnn'''<br />
<br />
-[0000:00]-+-00.0 Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br />
+-01.0 Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller<br />
+-1e.0-[0000:01]--+-05.0 ESS Technology ES1988 Allegro-1<br />
| +-09.0 Advanced Micro Devices [AMD] 79c978 [HomePNA]<br />
| \-0a.0 PCTel Inc HSP MicroModem 56<br />
+-1f.0 Intel Corporation 82801AA ISA Bridge (LPC)<br />
+-1f.1 Intel Corporation 82801AA IDE Controller<br />
+-1f.2 Intel Corporation 82801AA USB Controller<br />
\-1f.3 Intel Corporation 82801AA SMBus Controller<br />
<br />
== Building coreboot ==<br />
<br />
$ svn co svn://coreboot.org/repos/trunk/coreboot-v2<br />
$ cd coreboot-v2/targets<br />
$ ./buildtarget mitac/6513wu<br />
$ cd mitac/6513wu/6513wu<br />
<br />
Now copy your desired [[Payloads|payload]] into the current directory and name it '''payload.elf'''. Then:<br />
<br />
$ make<br />
<br />
Finally, prepend the VGA BIOS image (32 KB) to get your final coreboot image:<br />
<br />
$ cat ''vga.bin'' coreboot.rom > coreboot_final.rom<br />
<br />
(replace ''vga.bin'' with the file name of your VGA BIOS image)<br />
<br />
You can now flash the resulting '''coreboot_final.rom''' on a ROM chip using [[Flashrom]].<br />
<br />
<br />
{{PD-self}}</div>
Mgold
https://www.coreboot.org/index.php?title=File:Mitac-6513wu.jpeg&diff=8828
File:Mitac-6513wu.jpeg
2009-07-15T23:49:18Z
<p>Mgold: Mitac 6513WU mainboard.
Author: Michael Gold
{{PD-self}}</p>
<hr />
<div>Mitac 6513WU mainboard.<br />
<br />
Author: [[User:mgold|Michael Gold]]<br />
<br />
{{PD-self}}</div>
Mgold