Board:nokia/ip530: Difference between revisions

From coreboot
Jump to navigation Jump to search
Line 309: Line 309:


With this you have succesful added the USB port on the Nokia-IP530.
With this you have succesful added the USB port on the Nokia-IP530.
[[media:Rom-option-board-schema.pdf|Schematic]]
----
----



Revision as of 22:59, 8 January 2011

This page lists the coreboot status of the Nokia IP530 mainboard. It's maintained by Marc Bertens.

front view
front view
board view
board view


The Nokia IP530 is originally a Firewall that runs on the proprietary IPSO operating system of Nokia, it was based in the FreeBSD operating system. The original is only capable of starting a FreeBSD FS. There is as far as I known no CD support in the orginal BIOS.

The System has no VGA, all console activity must be done through a serial console.==

Status

Device/functionality Status Comments
CPU
CPU works OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK PIII SL5DV (1000 / 256 / 133 / 1.75V)
L1 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK CPU: L1 I cache: 16K, L1 D cache: 16K
L2 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP L2 cache is not being enabled at the moment. We're working on fixing it.
L3 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Multiple CPU support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Multi-core support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Hardware virtualization OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
RAM
EDO OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SDRAM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK upto 4 single sided 128Mb or 4 dual sided 256Mb
SO-DIMM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR2 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR3 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Dual channel support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
ECC support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP Not yet supported by the coreboot 440BX code, but it's on our TODO list.
On-board Hardware
On-board IDE 3.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
On-board IDE 2.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SATA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SCSI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK The USB is not routed to any connector, u can be picked up from the board it self, there will be a instruction on the wiki how to do this
On-board VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Ethernet OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Four intel 21143PD controllers.
On-board Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Modem OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board FireWire OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Smartcard reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board CompactFlash OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Is wrired are primary drive on primary IDE controller.
On-board PCMCIA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Texas Instruments PCI1225 PCMCIA/Cardbus controller
On-board Wifi OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Bluetooth OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SD card reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Add-on slots/cards
ISA add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Audio/Modem-Riser (AMR/CNR) cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
Mini-PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Mini-PCI-Express add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
PCI-X add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
AGP graphics cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x1 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x2 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x4 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x8 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x16 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x32 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
HTX add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Legacy / Super I/O
Floppy OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Serial port 1 (COM1) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Serial port 2 (COM2) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Parallel port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PS/2 keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PS/2 mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Game port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Infrared OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PC speaker OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DiskOnChip OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Input
Trackpoint OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Touchpad OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fn Hotkeys OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fingerprint Reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Laptop
Docking VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Displayport OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Thinklight OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Webcam OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Miscellaneous
Sensors / fan control OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP
Hardware watchdog OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SMBus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP
CAN bus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
CPU frequency scaling OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Other powersaving features OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
ACPI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | No There's no ACPI implementation for this board, but it's on our TODO list.
Reboot OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Poweroff OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Suspend OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Nonstandard LEDs OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Special-purpose LEDs available on the board, Alert and Fault are controlled by the superio
High precision event timers (HPET) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Random number generator (RNG) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on modem ring OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
TPM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Flashrom OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Supported flashrom revision 1010 or higher.

System Setup

Below the description is given for the connectors on the mainboard of the Nokia IP530, due missing documentation of the manufacturer.


J-DEBUG

The JDEBUG connector can be used for attaching an external ROM (flash chip) to the board for BIOS development.

JDEBUG connector
Pin# Name Description Pin# Name Description
1 unknown ? 2 VCC +5 Volt n/a
3 A16 Address line A16 4 A18 Address line A18
5 A15 Address line A15 6 A17 Address line A17
7 A12 Address line A12 8 A14 Address line A14
9 A7 Address line A7 10 A13 Address line A13
11 A6 Address line A6 12 A8 Address line A8
13 A5 Address line A5 14 A9 Address line A9
15 A4 Address line A4 16 A11 Address line A11
17 A3 Address line A3 18 OE# Chip Enable Line OE#
19 A2 Address line A2 20 A10 Address line A10
21 A1 Address line A1 22 JP800.1 BIOSCS#
23 A0 Address line A0 24 D7 Data line D7
25 D0 Data line A0 26 D6 Data line D6
27 D1 Data line D1 28 D5 Data line D5
29 D2 Data line D2 30 D4 Data line D4
31 IOW# Control line IOW# 32 D3 Data line D3
33 GND Ground 34 IOR# Control line IOR#

For recovery there can be placed an flashrom board on the J-DEBUG connector. Belowe here the schematic in PDF can be used.

Schematic

As wel the PCB layout in PDF, for this print it on a transparant paper in the highest quality (so it will be very black). From this a PCB can be made.

Printed Circuit Board (PCB)

The 34 pin connector shoud be female 90 degres, so that the board is upright when attached to the IP530. you can select a 32 DIL socket, 32 PLCC socket or both, but not both flashroms inserted only one at the time.

The overview can be used to place the components and solder them in. The red lines in the overview are wires that need to be soldered in.

Overview PCB

When ready flash the rom in a programmer and inserted it into a socket. Attach the board to the main board of the IP530 (notice the PIN 1 of both boards, when you put it wrong the flashrom on the option board will be blown-up.


Jumper JP800 - BIOSCS select

This jumper selected the on-board flash or the J-DEBUG connector where the BIOSCS# line is routed.

J800 Jumper
Pin# Name Description
1 JDEBUG.P22 This is connected to PIN 22 of the JDEBUG connection on the board
2 BIOSCS# Connected to the ROMCS# line of the Northbridge
3 CS# This is connected to CS# of the on-board flash chip.

The WP# line of the on-board flashchip is controlled by Pin39 of the SMSC FDC37B787 Super I/O chip.

On the production boards the J800 is not present and the R814 (0 Ohm) is placed, remove this resistor and solder in the 3 pin-jumper for JP800. And place the jumper on position 2-3 to select the on-board flash chip.


Jumper JP900

This is a input signal on the Super I/O chip.

J900 Jumper
Pin# Name Description
1 GND Ground of the system
2 GPIO16 Pin 4 of the SMSC FDC37B787 Super I/O chip.

Pin 2 is pulled-up by resistor up VCC.


Jumper JP901

This is a input signal on the Super I/O chip.

J901 Jumper
Pin# Name Description
1 GND Ground of the system
2 GPIO67 Pin 90 of the SMSC FDC37B787 Super I/O chip.

Pin 2 is pulled-up by resistor up VCC.


Jumper JKBD

JKBD Connector
Pin# Name Description
1 VCC VCC +5 volt
2 DATA The DAT line of the PS2 keyboard (pin 70 SMSC FDC37B787)
3 CLOCK The CLK line of the PS2 keyboard (pin 71 SMSC FDC37B787)
4 GND Ground of the system

Front LEDs

LEDs in front
LED Control line Description
Fault FDC37B787-GP13 active low
Alert FDC37B787-GP17 active low
 #define REG_GP1x		0xF6
 #define LED_FAULT		0x08
 #define LED_ALERT		0x80
 
 sio_enter_config( 0x3F0 );
 val = sio_read( 0x3F0, REG_GP1x );
 
 // To enable the ALERT led
 val &= ~LED_ALERT;
 
 // To disable the ALERT led
 val |= LED_ALERT;
 
 // To enable the FAULT led
 val &= ~LED_FAULT;
 
 // To disable the FAULT led
 val |= LED_FAULT;
 
 sio_write( 0x3F0, REG_GP1x, val );
 sio_leave_config( 0x3F0 );

By using the sio_xxx() functions from flashrom, makes easy work dis-/en-abling the LEDs in the front.


USB Connections

This requires two wires to be soldered on the backside of the mainboard, pictures will be added later

Ckick on the image to see a larger view

Put the mainboard upside down, and the power connector facing you. Find the footprint of the 82371 southbridge. Locate the two pads; i directly above (about 1.5 mm) the F1 pin of the SB, and 1 to left (about 15mm) of the A5 pin of the SB.

Solder two wires to the two pads, be aware that the USB lines are polarity sensitive !!!

                 _____
 USBPxP >---+---|_____|---+---------> USBPx+ to connector pin 3
            |     27R     |
            |            ---      * VCC 5 volt
          ----- 27pF     | | 15K  |
          -----          | |      |
            |            | |      +-> to connector pin 1
            |            --- 
            |             | 
 * GND  >---+-------------+---------> to connector pin 4
            |     27R     |
            |            ---
          ----- 27pF     | | 15K
          -----          | |
            |            | |
            |            ---
            |    _____    |
 USBPxN >---+---|_____|---+---------> USBPx- to connector pin 2
                  27R
 * pickup from somewhere on the board the power lines VCC 5 volt and GND (for instance on the JKBD connector pin 1 for VCC and pin 4 for GND)

With this you have succesful added the USB port on the Nokia-IP530.

Schematic




Installing/booting the Nokia-IP530

The IP530 came with 8, 16 and 32Mb CF cards. There is available for download a 32Mb image that will start with the vendor bios. This image which can be placed on the standard CF card of the IP530.

 #[sudo] dd of=/dev/<cf-card-device> of=./linux-nokia-ip530-coreboot.img

Download 32Mb CF card image (7.9Mb)

This is not a distrubution, but a lean and mean installation with a stable kernel. This image is intended to be used for upgrading, testing and developing coreboot on a x86 system.

Place the CF card in the slot of the IP530, connect a serial cross cable. get a terminal program (like putty) set the speed to 115200 Bps None, 8, 1 and boot up the IP530.

You must get a prompt.

When installing Linux on/for a Nokia-IP530, there are two ways; 1 use a donor PC or installation of s a distro that uses the serial console for its installation. The kernel boot customation, must be something like this "apci=off console=ttyS0,115200n8" apci=off is nessary due that the Nokia-IP530 coreboot bios does'nt support APCI yet. Make sure that the ttyS0 is enabled in inittab, or some other place depending on the distro.


Other OSes

It should be posible to run any OS that is able to run without the following devices: - Videocard - Keyboard - Mouse - Floppy - Paralell port

So NO windows :-)


Flashing

Depending on the board revision, the board revision can be found on the inside of the machine, its on little stickers on the right-side of the board. There are currently to revisions (A/B) available doe the IP530.

 coreboot-nokia-ip530-board-rev-a.rom
 
 coreboot-nokia-ip530-board-rev-b.rom

Both rom images are on the Download 32Mb CF card image (7.9Mb)

For flashing the images read the documentation of flashrom.


Feedback

Havefun with your Nokia-IP530, any remarks about this please email me on pe2mbs@yahoo.co.uk

You can mail me too if you have a board revision that is not supported yet, you must be able to load the rom image "coreboot-nokia-ip530-board-rev-b.rom", but be prepared that maybe not all hardware is working.


Page history

History
By Date Description
Marc Bertens 4 june 2010 Initial Wiki page for Nokia IP530
Marc Bertens 28 december 2010 Added photo of board view, changed status of LEDS, added information about the LEDS
Marc Bertens 6 january 2010 Added discription about Installing OSes, flashing and booting. Corrected the J-DEBUG connector
Marc Bertens 7 january 2010 Added discription and PDFs for the flashrom option board.
GNU head This work is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This work is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.