[LinuxBIOS] r2581 - trunk/LinuxBIOSv2/util/flashrom
svn at openbios.org
svn at openbios.org
Thu Apr 5 00:45:58 CEST 2007
Author: stepan
Date: 2007-04-05 00:45:58 +0200 (Thu, 05 Apr 2007)
New Revision: 2581
Added:
trunk/LinuxBIOSv2/util/flashrom/board_enable.c
trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
Removed:
trunk/LinuxBIOSv2/util/flashrom/flash_enable.c
Modified:
trunk/LinuxBIOSv2/util/flashrom/Makefile
trunk/LinuxBIOSv2/util/flashrom/flash.h
trunk/LinuxBIOSv2/util/flashrom/flash_rom.c
Log:
flashrom: split flash_enable.c into chipset_enable.c and board_enable.c
This splits up the ROM Write enable code into chipset specific and
board specific parts. This of course means that a lot of code is
plainly moved about.
* Allows for linuxbios name matching and pci-subsystem id matching.
The latter uses a double set to properly distuinguish boards despite
of some known vendors being lax about it.
* Fixes GPIO15 being raised on every VT8235 southbridge, regardless of what
that line actually controls; rom on EPIA-M, backlight on mitac 8999 laptop.
* Adds flashrom support for Asus A7V400-MX (KM400 + VT8235)
* Island aruma was renamed agami aruma, the board specific code now got
adjusted. A set of pci-ids was retrieved from source code.
Signed-off-by: Luc Verhaegen <libv at skynet.be>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Modified: trunk/LinuxBIOSv2/util/flashrom/Makefile
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/Makefile 2007-04-03 10:45:53 UTC (rev 2580)
+++ trunk/LinuxBIOSv2/util/flashrom/Makefile 2007-04-04 22:45:58 UTC (rev 2581)
@@ -20,10 +20,11 @@
STRIP_ARGS = -s
endif
-OBJS = flash_enable.o udelay.o jedec.o sst28sf040.o am29f040b.o mx29f002.o \
- sst39sf020.o m29f400bt.o w49f002u.o 82802ab.o msys_doc.o pm49fl004.o \
- sst49lf040.o sst49lfxxxc.o sst_fwhub.o layout.o lbtable.o \
- flashchips.o flash_rom.o sharplhf00l04.o
+OBJS = chipset_enable.o board_enable.o udelay.o jedec.o sst28sf040.o \
+ am29f040b.o mx29f002.o sst39sf020.o m29f400bt.o w49f002u.o \
+ 82802ab.o msys_doc.o pm49fl004.o sst49lf040.o sst49lfxxxc.o \
+ sst_fwhub.o layout.o lbtable.o flashchips.o flash_rom.o \
+ sharplhf00l04.o
all: pciutils dep $(PROGRAM)
Added: trunk/LinuxBIOSv2/util/flashrom/board_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/board_enable.c (rev 0)
+++ trunk/LinuxBIOSv2/util/flashrom/board_enable.c 2007-04-04 22:45:58 UTC (rev 2581)
@@ -0,0 +1,299 @@
+/*
+ * flash rom utility: enable flash writes (board specific)
+ *
+ * Copyright (C) 2005-2007 coresystems GmbH <stepan at coresystems.de>
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ * Copyright (C) 2007 Luc Verhaegen <libv at skynet.be>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2
+ *
+ */
+
+/*
+ * Contains the board specific flash enables.
+ */
+
+#include <stdio.h>
+#include <pci/pci.h>
+#include <stdint.h>
+#include <string.h>
+
+#include "flash.h"
+#include "debug.h"
+
+/*
+ * Match on pci-ids, no report received, just data from the mainboard
+ * specific code:
+ * main: 0x1022:0x746B, which is the SMBUS controller.
+ * card: 0x1022:0x36C0...
+ */
+
+static int board_agami_aruma(char *name)
+{
+ /* Extended function index register, either 0x2e or 0x4e */
+#define EFIR 0x2e
+ /* Extended function data register, one plus the index reg. */
+#define EFDR EFIR + 1
+ char b;
+
+ /* Disable the flash write protect. The flash write protect is
+ * connected to the WinBond w83627hf GPIO 24.
+ */
+ outb(0x87, EFIR); /* sequence to unlock extended functions */
+ outb(0x87, EFIR);
+
+ outb(0x20, EFIR); /* SIO device ID register */
+ b = inb(EFDR);
+ printf_debug("\nW83627HF device ID = 0x%x\n",b);
+
+ if (b != 0x52) {
+ fprintf(stderr, "\nIncorrect device ID, aborting write protect disable\n");
+ return -1;
+ }
+
+ outb(0x2b, EFIR); /* GPIO multiplexed pin reg. */
+ b = inb(EFDR) | 0x10;
+ outb(0x2b, EFIR);
+ outb(b, EFDR); /* select GPIO 24 instead of WDTO */
+
+ outb(0x7, EFIR); /* logical device select */
+ outb(0x8, EFDR); /* point to device 8, GPIO port 2 */
+
+ outb(0x30, EFIR); /* logic device activation control */
+ outb(0x1, EFDR); /* activate */
+
+ outb(0xf0, EFIR); /* GPIO 20-27 I/O selection register */
+ b = inb(EFDR) & ~0x10;
+ outb(0xf0, EFIR);
+ outb(b, EFDR); /* set GPIO 24 as an output */
+
+ outb(0xf1, EFIR); /* GPIO 20-27 data register */
+ b = inb(EFDR) | 0x10;
+ outb(0xf1, EFIR);
+ outb(b, EFDR); /* set GPIO 24 */
+
+ outb(0xaa, EFIR); /* command to exit extended functions */
+
+ return 0;
+}
+
+/*
+ * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
+ *
+ * We don't need to do this when using linuxbios, GPIO15 is never lowered there.
+ */
+
+static int board_via_epia_m(char *name)
+{
+ struct pci_dev *dev;
+ unsigned int base;
+ uint8_t val;
+
+ dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
+ if (!dev) {
+ fprintf(stderr, "\nERROR: VT8235 ISA Bridge not found.\n");
+ return -1;
+ }
+
+ /* GPIO12-15 -> output */
+ val = pci_read_byte(dev, 0xE4);
+ val |= 0x10;
+ pci_write_byte(dev, 0xE4, val);
+
+ /* Get Power Management IO address. */
+ base = pci_read_word(dev, 0x88) & 0xFF80;
+
+ /* enable GPIO15 which is connected to write protect. */
+ val = inb(base + 0x4D);
+ val |= 0x80;
+ outb(val, base + 0x4D);
+
+ return 0;
+}
+
+/*
+ * Winbond LPC super IO.
+ *
+ * Raises the ROM MEMW# line.
+ */
+
+static void w83697_rom_memw_enable(void)
+{
+ uint8_t val;
+
+ outb(0x87, 0x2E); /* enable extended functions */
+ outb(0x87, 0x2E);
+
+ outb(0x24, 0x2E); /* rom bits live here */
+
+ val = inb(0x2F);
+ if (!(val & 0x02)) /* flash rom enabled? */
+ outb(val | 0x08, 0x2F); /* enable MEMW# */
+
+ outb(0xAA, 0x2E); /* disable extended functions */
+}
+
+/*
+ * Suited for Asus A7V8X-MX SE and A7V400-MX.
+ *
+ */
+
+static int board_asus_a7v8x_mx(char *name)
+{
+ struct pci_dev *dev;
+ uint8_t val;
+
+ dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
+ if (!dev) {
+ fprintf(stderr, "\nERROR: VT8235 ISA Bridge not found.\n");
+ return -1;
+ }
+
+ /* This bit is marked reserved actually */
+ val = pci_read_byte(dev, 0x59);
+ val &= 0x7F;
+ pci_write_byte(dev, 0x59, val);
+
+ w83697_rom_memw_enable();
+
+ return 0;
+}
+
+/*
+ * We use 2 sets of ids here, you're free to choose which is which. This
+ * to provide a very high degree of certainty when matching a board on
+ * the basis of Subsystem/card ids. As not every vendor handles
+ * subsystem/card ids in a sane manner.
+ *
+ * Keep the second set nulled if it should be ignored.
+ *
+ */
+
+struct board_pciid_enable {
+ /* Any device, but make it sensible, like the isa bridge. */
+ uint16_t first_vendor;
+ uint16_t first_device;
+ uint16_t first_card_vendor;
+ uint16_t first_card_device;
+
+ /* Any device, but make it sensible, like
+ * the host bridge. May be NULL
+ */
+ uint16_t second_vendor;
+ uint16_t second_device;
+ uint16_t second_card_vendor;
+ uint16_t second_card_device;
+
+ /* From linuxbios table */
+ char *lb_vendor;
+ char *lb_part;
+
+ char *name;
+ int (*enable)(char *name);
+};
+
+struct board_pciid_enable board_pciid_enables[] = {
+ { 0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000,
+ "AGAMI", "ARUMA", "Agami Aruma", board_agami_aruma },
+ { 0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01,
+ NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m },
+ { 0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118,
+ NULL, NULL, "Asus A7V8-MX SE", board_asus_a7v8x_mx },
+ { 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL } /* Keep this */
+
+};
+
+/*
+ * Match boards on linuxbios table gathered vendor and part name.
+ * Require main pci-ids to match too as extra safety.
+ *
+ */
+static struct board_pciid_enable *
+board_match_linuxbios_name(char *vendor, char *part)
+{
+ struct board_pciid_enable *board = board_pciid_enables;
+
+ for (; board->name; board++) {
+ if (!board->lb_vendor || strcmp(board->lb_vendor, vendor))
+ continue;
+
+ if (!board->lb_part || strcmp(board->lb_part, part))
+ continue;
+
+ if (!pci_dev_find(board->first_vendor, board->first_device))
+ continue;
+
+ if (board->second_vendor &&
+ !pci_dev_find(board->second_vendor, board->second_device))
+ continue;
+ return board;
+ }
+ return NULL;
+}
+
+/*
+ * Match boards on pci ids and subsystem ids.
+ * Second set of ids can be main only or missing completely.
+ */
+static struct board_pciid_enable *board_match_pci_card_ids(void)
+{
+ struct board_pciid_enable *board = board_pciid_enables;
+
+ for (; board->name; board++) {
+ if (!board->first_card_vendor || !board->first_card_device)
+ continue;
+
+ if (!pci_card_find(board->first_vendor, board->first_device,
+ board->first_card_vendor,
+ board->first_card_device))
+ continue;
+
+ if (board->second_vendor) {
+ if (board->second_card_vendor) {
+ if (!pci_card_find(board->second_vendor,
+ board->second_device,
+ board->second_card_vendor,
+ board->second_card_device))
+ continue;
+ } else {
+ if (!pci_dev_find(board->second_vendor,
+ board->second_device))
+ continue;
+ }
+ }
+
+ return board;
+ }
+
+ return NULL;
+}
+
+/*
+ *
+ */
+int board_flash_enable(char *vendor, char *part)
+{
+ struct board_pciid_enable *board = NULL;
+ int ret = 0;
+
+ if (vendor && part)
+ board = board_match_linuxbios_name(vendor, part);
+
+ if (!board)
+ board = board_match_pci_card_ids();
+
+ if (board) {
+ printf("Found board \"%s\": Enabling flash write... ",
+ board->name);
+
+ ret = board->enable(board->name);
+ if (ret)
+ printf("Failed!\n");
+ else
+ printf("OK.\n");
+ }
+
+ return ret;
+}
Added: trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c (rev 0)
+++ trunk/LinuxBIOSv2/util/flashrom/chipset_enable.c 2007-04-04 22:45:58 UTC (rev 2581)
@@ -0,0 +1,469 @@
+/*
+ * flash rom utility: enable flash writes
+ *
+ * Copyright (C) 2000 Silicon Integrated System Corporation
+ * Copyright (C) 2005-2007 coresystems GmbH <stepan at coresystems.de>
+ * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2
+ *
+ */
+
+#include <stdio.h>
+#include <pci/pci.h>
+#include <stdlib.h>
+
+#include "flash.h"
+#include "debug.h"
+
+static int enable_flash_sis630(struct pci_dev *dev, char *name)
+{
+ char b;
+
+ /* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630 */
+ outl(0x80000840, 0x0cf8);
+ b = inb(0x0cfc) | 0x0b;
+ outb(b, 0xcfc);
+ /* Flash write enable on SiS 540/630 */
+ outl(0x80000845, 0x0cf8);
+ b = inb(0x0cfd) | 0x40;
+ outb(b, 0xcfd);
+
+ /* The same thing on SiS 950 SuperIO side */
+ outb(0x87, 0x2e);
+ outb(0x01, 0x2e);
+ outb(0x55, 0x2e);
+ outb(0x55, 0x2e);
+
+ if (inb(0x2f) != 0x87) {
+ outb(0x87, 0x4e);
+ outb(0x01, 0x4e);
+ outb(0x55, 0x4e);
+ outb(0xaa, 0x4e);
+ if (inb(0x4f) != 0x87) {
+ printf("Can not access SiS 950\n");
+ return -1;
+ }
+ outb(0x24, 0x4e);
+ b = inb(0x4f) | 0xfc;
+ outb(0x24, 0x4e);
+ outb(b, 0x4f);
+ outb(0x02, 0x4e);
+ outb(0x02, 0x4f);
+ }
+
+ outb(0x24, 0x2e);
+ printf("2f is %#x\n", inb(0x2f));
+ b = inb(0x2f) | 0xfc;
+ outb(0x24, 0x2e);
+ outb(b, 0x2f);
+
+ outb(0x02, 0x2e);
+ outb(0x02, 0x2f);
+
+ return 0;
+}
+
+/* Datasheet:
+ * - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)
+ * - URL: http://www.intel.com/design/intarch/datashts/290562.htm
+ * - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
+ * - Order Number: 290562-001
+ */
+static int enable_flash_piix4(struct pci_dev *dev, char *name)
+{
+ uint16_t old, new;
+ uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */
+
+ old = pci_read_word(dev, xbcs);
+
+ /* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to
+ FFF00000-FFF7FFFF are forwarded to ISA).
+ Set bit 7: Extended BIOS Enable (PCI master accesses to
+ FFF80000-FFFDFFFF are forwarded to ISA).
+ Set bit 6: Lower BIOS Enable (PCI master, or ISA master accesses to
+ the lower 64-Kbyte BIOS block (E0000-EFFFF) at the top
+ of 1 Mbyte, or the aliases at the top of 4 Gbyte
+ (FFFE0000-FFFEFFFF) result in the generation of BIOSCS#.
+ Note: Accesses to FFFF0000-FFFFFFFF are always forwarded to ISA.
+ Set bit 2: BIOSCS# Write Enable (1=enable, 0=disable). */
+ new = old | 0x2c4;
+
+ if (new == old)
+ return 0;
+
+ pci_write_word(dev, xbcs, new);
+
+ if (pci_read_word(dev, xbcs) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_ich(struct pci_dev *dev, char *name, int bios_cntl)
+{
+ /* register 4e.b gets or'ed with one */
+ uint8_t old, new;
+
+ /* if it fails, it fails. There are so many variations of broken mobos
+ * that it is hard to argue that we should quit at this point.
+ */
+
+ /* Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
+ * just treating it as 8 bit wide seems to work fine in practice.
+ */
+
+ /* see ie. page 375 of "Intel ICH7 External Design Specification"
+ * http://download.intel.com/design/chipsets/datashts/30701302.pdf
+ */
+
+ old = pci_read_byte(dev, bios_cntl);
+
+ new = old | 1;
+
+ if (new == old)
+ return 0;
+
+ pci_write_byte(dev, bios_cntl, new);
+
+ if (pci_read_byte(dev, bios_cntl) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ bios_cntl, new, name);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_ich_4e(struct pci_dev *dev, char *name)
+{
+ return enable_flash_ich(dev, name, 0x4e);
+}
+
+static int enable_flash_ich_dc(struct pci_dev *dev, char *name)
+{
+ return enable_flash_ich(dev, name, 0xdc);
+}
+
+/*
+ *
+ */
+static int
+enable_flash_vt823x(struct pci_dev *dev, char *name)
+{
+ uint8_t val;
+
+ /* ROM Write enable */
+ val = pci_read_byte(dev, 0x40);
+ val |= 0x10;
+ pci_write_byte(dev, 0x40, val);
+
+ if (pci_read_byte(dev, 0x40) != val) {
+ printf("\nWARNING: Failed to enable ROM Write on \"%s\"\n",
+ name);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int enable_flash_cs5530(struct pci_dev *dev, char *name)
+{
+ uint8_t new;
+
+ pci_write_byte(dev, 0x52, 0xee);
+
+ new = pci_read_byte(dev, 0x52);
+
+ if (new != 0xee) {
+ printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x52, new, name);
+ return -1;
+ }
+
+ new = pci_read_byte(dev, 0x5b) | 0x20;
+ pci_write_byte(dev, 0x5b, new);
+
+ return 0;
+}
+
+
+static int enable_flash_sc1100(struct pci_dev *dev, char *name)
+{
+ uint8_t new;
+
+ pci_write_byte(dev, 0x52, 0xee);
+
+ new = pci_read_byte(dev, 0x52);
+
+ if (new != 0xee) {
+ printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x52, new, name);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_sis5595(struct pci_dev *dev, char *name)
+{
+ uint8_t new, newer;
+
+ new = pci_read_byte(dev, 0x45);
+
+ /* clear bit 5 */
+ new &= (~0x20);
+ /* set bit 2 */
+ new |= 0x4;
+
+ pci_write_byte(dev, 0x45, new);
+
+ newer = pci_read_byte(dev, 0x45);
+ if (newer != new) {
+ printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x45, new, name);
+ printf("Stuck at 0x%x\n", newer);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_amd8111(struct pci_dev *dev, char *name)
+{
+ /* register 4e.b gets or'ed with one */
+ uint8_t old, new;
+ /* if it fails, it fails. There are so many variations of broken mobos
+ * that it is hard to argue that we should quit at this point.
+ */
+
+ /* enable decoding at 0xffb00000 to 0xffffffff */
+ old = pci_read_byte(dev, 0x43);
+ new = old | 0xC0;
+ if (new != old) {
+ pci_write_byte(dev, 0x43, new);
+ if (pci_read_byte(dev, 0x43) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x43, new, name);
+ }
+ }
+
+ old = pci_read_byte(dev, 0x40);
+ new = old | 0x01;
+ if (new == old)
+ return 0;
+ pci_write_byte(dev, 0x40, new);
+
+ if (pci_read_byte(dev, 0x40) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x40, new, name);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_ck804(struct pci_dev *dev, char *name)
+{
+ /* register 4e.b gets or'ed with one */
+ uint8_t old, new;
+ /* if it fails, it fails. There are so many variations of broken mobos
+ * that it is hard to argue that we should quit at this point.
+ */
+
+ /* dump_pci_device(dev); */
+
+ old = pci_read_byte(dev, 0x88);
+ new = old | 0xc0;
+ if (new != old) {
+ pci_write_byte(dev, 0x88, new);
+ if (pci_read_byte(dev, 0x88) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x88, new, name);
+ }
+ }
+
+ old = pci_read_byte(dev, 0x6d);
+ new = old | 0x01;
+ if (new == old)
+ return 0;
+ pci_write_byte(dev, 0x6d, new);
+
+ if (pci_read_byte(dev, 0x6d) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x6d, new, name);
+ return -1;
+ }
+ return 0;
+}
+
+static int enable_flash_sb400(struct pci_dev *dev, char *name)
+{
+ uint8_t tmp;
+
+ struct pci_filter f;
+ struct pci_dev *smbusdev;
+
+ /* then look for the smbus device */
+ pci_filter_init((struct pci_access *) 0, &f);
+ f.vendor = 0x1002;
+ f.device = 0x4372;
+
+ for (smbusdev = pacc->devices; smbusdev; smbusdev = smbusdev->next) {
+ if (pci_filter_match(&f, smbusdev)) {
+ break;
+ }
+ }
+
+ if(!smbusdev) {
+ fprintf(stderr, "ERROR: SMBus device not found. aborting\n");
+ exit(1);
+ }
+
+ /* enable some smbus stuff */
+ tmp=pci_read_byte(smbusdev, 0x79);
+ tmp|=0x01;
+ pci_write_byte(smbusdev, 0x79, tmp);
+
+ /* change southbridge */
+ tmp=pci_read_byte(dev, 0x48);
+ tmp|=0x21;
+ pci_write_byte(dev, 0x48, tmp);
+
+ /* now become a bit silly. */
+ tmp=inb(0xc6f);
+ outb(tmp,0xeb);
+ outb(tmp, 0xeb);
+ tmp|=0x40;
+ outb(tmp, 0xc6f);
+ outb(tmp, 0xeb);
+ outb(tmp, 0xeb);
+
+ return 0;
+}
+
+static int enable_flash_mcp55(struct pci_dev *dev, char *name)
+{
+ /* register 4e.b gets or'ed with one */
+ unsigned char old, new, byte;
+ unsigned short word;
+
+ /* if it fails, it fails. There are so many variations of broken mobos
+ * that it is hard to argue that we should quit at this point.
+ */
+
+ /* dump_pci_device(dev); */
+
+ /* Set the 4MB enable bit bit */
+ byte = pci_read_byte(dev, 0x88);
+ byte |= 0xff; /* 256K */
+ pci_write_byte(dev, 0x88, byte);
+ byte = pci_read_byte(dev, 0x8c);
+ byte |= 0xff; /* 1M */
+ pci_write_byte(dev, 0x8c, byte);
+ word = pci_read_word(dev, 0x90);
+ word |= 0x7fff; /* 15M */
+ pci_write_word(dev, 0x90, word);
+
+ old = pci_read_byte(dev, 0x6d);
+ new = old | 0x01;
+ if (new == old)
+ return 0;
+ pci_write_byte(dev, 0x6d, new);
+
+ if (pci_read_byte(dev, 0x6d) != new) {
+ printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
+ 0x6d, new, name);
+ return -1;
+ }
+
+ return 0;
+
+}
+
+typedef struct penable {
+ unsigned short vendor, device;
+ char *name;
+ int (*doit) (struct pci_dev * dev, char *name);
+} FLASH_ENABLE;
+
+static FLASH_ENABLE enables[] = {
+ {0x1039, 0x0630, "SIS630", enable_flash_sis630},
+ {0x8086, 0x7110, "PIIX4/PIIX4E/PIIX4M", enable_flash_piix4},
+ {0x8086, 0x2410, "ICH", enable_flash_ich_4e},
+ {0x8086, 0x2420, "ICH0", enable_flash_ich_4e},
+ {0x8086, 0x2440, "ICH2", enable_flash_ich_4e},
+ {0x8086, 0x244c, "ICH2-M", enable_flash_ich_4e},
+ {0x8086, 0x2480, "ICH3-S", enable_flash_ich_4e},
+ {0x8086, 0x248c, "ICH3-M", enable_flash_ich_4e},
+ {0x8086, 0x24c0, "ICH4/ICH4-L", enable_flash_ich_4e},
+ {0x8086, 0x24cc, "ICH4-M", enable_flash_ich_4e},
+ {0x8086, 0x24d0, "ICH5/ICH5R", enable_flash_ich_4e},
+ {0x8086, 0x2640, "ICH6/ICH6R", enable_flash_ich_dc},
+ {0x8086, 0x2641, "ICH6-M", enable_flash_ich_dc},
+ {0x8086, 0x27b0, "ICH7DH", enable_flash_ich_dc},
+ {0x8086, 0x27b8, "ICH7/ICH7R", enable_flash_ich_dc},
+ {0x8086, 0x27b9, "ICH7M", enable_flash_ich_dc},
+ {0x8086, 0x27bd, "ICH7MDH", enable_flash_ich_dc},
+ {0x8086, 0x2810, "ICH8/ICH8R", enable_flash_ich_dc},
+ {0x8086, 0x2812, "ICH8DH", enable_flash_ich_dc},
+ {0x8086, 0x2814, "ICH8DO", enable_flash_ich_dc},
+ {0x1106, 0x8231, "VT8231", enable_flash_vt823x},
+ {0x1106, 0x3177, "VT8235", enable_flash_vt823x},
+ {0x1106, 0x3227, "VT8237", enable_flash_vt823x},
+ {0x1106, 0x0686, "VT82C686", enable_flash_amd8111},
+ {0x1078, 0x0100, "CS5530", enable_flash_cs5530},
+ {0x100b, 0x0510, "SC1100", enable_flash_sc1100},
+ {0x1039, 0x0008, "SIS5595", enable_flash_sis5595},
+ {0x1022, 0x7468, "AMD8111", enable_flash_amd8111},
+ /* this fallthrough looks broken. */
+ {0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804}, /* LPC */
+ {0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804}, /* Pro */
+ {0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804}, /* Slave, should not be here, to fix known bug for A01. */
+
+ {0x10de, 0x0260, "NVidia MCP51", enable_flash_ck804},
+ {0x10de, 0x0261, "NVidia MCP51", enable_flash_ck804},
+ {0x10de, 0x0262, "NVidia MCP51", enable_flash_ck804},
+ {0x10de, 0x0263, "NVidia MCP51", enable_flash_ck804},
+
+ {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, /* Gigabyte m57sli-s4 */
+ {0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0364, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
+ {0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55}, /* Pro */
+
+ {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
+};
+
+/*
+ *
+ */
+int
+chipset_flash_enable(void)
+{
+ struct pci_dev *dev = 0;
+ int ret = -2; /* nothing! */
+ int i;
+
+ /* now let's try to find the chipset we have ... */
+ for (i = 0; i < sizeof(enables) / sizeof(enables[0]); i++) {
+ dev = pci_dev_find(enables[i].vendor, enables[i].device);
+ if (dev)
+ break;
+ }
+
+ if (dev) {
+ printf("Found chipset \"%s\": Enabling flash write... ",
+ enables[i].name);
+
+ ret = enables[i].doit(dev, enables[i].name);
+ if (ret)
+ printf("Failed!\n");
+ else
+ printf("OK.\n");
+ }
+
+ return ret;
+}
Modified: trunk/LinuxBIOSv2/util/flashrom/flash.h
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/flash.h 2007-04-03 10:45:53 UTC (rev 2580)
+++ trunk/LinuxBIOSv2/util/flashrom/flash.h 2007-04-04 22:45:58 UTC (rev 2581)
@@ -3,7 +3,7 @@
*
* Copyright 2000 Silicon Integrated System Corporation
* Copyright 2000 Ronald G. Minnich <rminnich at gmail.com>
- * Copyright 2005 coresystems GmbH <stepan at coresystems.de>
+ * Copyright 2005-2007 coresystems GmbH <stepan at coresystems.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -128,8 +128,16 @@
extern void myusec_delay(int time);
extern void myusec_calibrate_delay();
-extern int enable_flash_write(void);
+/* pci handling for board/chipset_enable */
+extern struct pci_access *pacc; /* For board and chipset_enable */
+extern struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device);
+extern struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
+ uint16_t card_vendor, uint16_t card_device);
+
+extern int board_flash_enable(char *vendor, char *part); /* board_enable.c */
+extern int chipset_flash_enable(void); /* chipset_enable.c */
+
/* physical memory mapping device */
#if defined (__sun) && (defined(__i386) || defined(__amd64))
Deleted: trunk/LinuxBIOSv2/util/flashrom/flash_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/flash_enable.c 2007-04-03 10:45:53 UTC (rev 2580)
+++ trunk/LinuxBIOSv2/util/flashrom/flash_enable.c 2007-04-04 22:45:58 UTC (rev 2581)
@@ -1,597 +0,0 @@
-/*
- * flash rom utility: enable flash writes
- *
- * Copyright (C) 2000-2004 ???
- * Copyright (C) 2005 coresystems GmbH <stepan at openbios.org>
- * Copyright (C) 2006 Uwe Hermann <uwe at hermann-uwe.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2
- *
- */
-
-#include <stdio.h>
-#include <pci/pci.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <string.h>
-#if defined (__sun) && (defined(__i386) || defined(__amd64))
-#include <strings.h>
-#include <sys/sysi86.h>
-#include <sys/psw.h>
-#include <asm/sunddi.h>
-#endif
-#include "flash.h"
-#include "lbtable.h"
-#include "debug.h"
-
-// We keep this for the others.
-static struct pci_access *pacc;
-
-static int enable_flash_sis630(struct pci_dev *dev, char *name)
-{
- char b;
-
- /* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630 */
- outl(0x80000840, 0x0cf8);
- b = inb(0x0cfc) | 0x0b;
- outb(b, 0xcfc);
- /* Flash write enable on SiS 540/630 */
- outl(0x80000845, 0x0cf8);
- b = inb(0x0cfd) | 0x40;
- outb(b, 0xcfd);
-
- /* The same thing on SiS 950 SuperIO side */
- outb(0x87, 0x2e);
- outb(0x01, 0x2e);
- outb(0x55, 0x2e);
- outb(0x55, 0x2e);
-
- if (inb(0x2f) != 0x87) {
- outb(0x87, 0x4e);
- outb(0x01, 0x4e);
- outb(0x55, 0x4e);
- outb(0xaa, 0x4e);
- if (inb(0x4f) != 0x87) {
- printf("Can not access SiS 950\n");
- return -1;
- }
- outb(0x24, 0x4e);
- b = inb(0x4f) | 0xfc;
- outb(0x24, 0x4e);
- outb(b, 0x4f);
- outb(0x02, 0x4e);
- outb(0x02, 0x4f);
- }
-
- outb(0x24, 0x2e);
- printf("2f is %#x\n", inb(0x2f));
- b = inb(0x2f) | 0xfc;
- outb(0x24, 0x2e);
- outb(b, 0x2f);
-
- outb(0x02, 0x2e);
- outb(0x02, 0x2f);
-
- return 0;
-}
-
-/* Datasheet:
- * - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)
- * - URL: http://www.intel.com/design/intarch/datashts/290562.htm
- * - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
- * - Order Number: 290562-001
- */
-static int enable_flash_piix4(struct pci_dev *dev, char *name)
-{
- uint16_t old, new;
- uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */
-
- old = pci_read_word(dev, xbcs);
-
- /* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to
- FFF00000-FFF7FFFF are forwarded to ISA).
- Set bit 7: Extended BIOS Enable (PCI master accesses to
- FFF80000-FFFDFFFF are forwarded to ISA).
- Set bit 6: Lower BIOS Enable (PCI master, or ISA master accesses to
- the lower 64-Kbyte BIOS block (E0000-EFFFF) at the top
- of 1 Mbyte, or the aliases at the top of 4 Gbyte
- (FFFE0000-FFFEFFFF) result in the generation of BIOSCS#.
- Note: Accesses to FFFF0000-FFFFFFFF are always forwarded to ISA.
- Set bit 2: BIOSCS# Write Enable (1=enable, 0=disable). */
- new = old | 0x2c4;
-
- if (new == old)
- return 0;
-
- pci_write_word(dev, xbcs, new);
-
- if (pci_read_word(dev, xbcs) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
- return -1;
- }
- return 0;
-}
-
-static int enable_flash_ich(struct pci_dev *dev, char *name, int bios_cntl)
-{
- /* register 4e.b gets or'ed with one */
- uint8_t old, new;
-
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- /* Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
- * just treating it as 8 bit wide seems to work fine in practice.
- */
-
- /* see ie. page 375 of "Intel ICH7 External Design Specification"
- * http://download.intel.com/design/chipsets/datashts/30701302.pdf
- */
-
- old = pci_read_byte(dev, bios_cntl);
-
- new = old | 1;
-
- if (new == old)
- return 0;
-
- pci_write_byte(dev, bios_cntl, new);
-
- if (pci_read_byte(dev, bios_cntl) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- bios_cntl, new, name);
- return -1;
- }
- return 0;
-}
-
-static int enable_flash_ich_4e(struct pci_dev *dev, char *name)
-{
- return enable_flash_ich(dev, name, 0x4e);
-}
-
-static int enable_flash_ich_dc(struct pci_dev *dev, char *name)
-{
- return enable_flash_ich(dev, name, 0xdc);
-}
-
-static int enable_flash_vt823x(struct pci_dev *dev, char *name)
-{
- uint8_t val;
- int ret = 0;
-
- /* ROM Write enable */
- val = pci_read_byte(dev, 0x40);
- val |= 0x10;
- pci_write_byte(dev, 0x40, val);
-
- if (pci_read_byte(dev, 0x40) != val) {
- printf("Warning: Failed to enable ROM Write on %s\n", name);
- ret = -1;
- }
-
- if (dev->device_id == 0x3177) { /* VT8235 */
- if (!iopl(3)) { /* enable full IO access */
- unsigned int base;
-
- /* GPIO12-15 -> output */
- val = pci_read_byte(dev, 0xE4);
- val |= 0x38;
- pci_write_byte(dev, 0xE4, val);
-
- /* Get Power Management IO address. */
- base = pci_read_word(dev, 0x88) & 0xFF80;
-
- /* enable GPIO15 which is connected to write protect. */
- val = inb(base + 0x4d);
- val |= 0xFF;
- outb(val, base + 0x4d);
-
- val = inb(base + 0x4E);
- val |= 0x0F;
- outb(val, base + 0x4E);
- } else {
- printf("Warning; Failed to disable Write Protect"
- " on %s (iopl failed)\n", name);
- return -1;
- }
- }
-
- return ret;
-}
-
-static int enable_flash_cs5530(struct pci_dev *dev, char *name)
-{
- uint8_t new;
-
- pci_write_byte(dev, 0x52, 0xee);
-
- new = pci_read_byte(dev, 0x52);
-
- if (new != 0xee) {
- printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x52, new, name);
- return -1;
- }
-
- new = pci_read_byte(dev, 0x5b) | 0x20;
- pci_write_byte(dev, 0x5b, new);
-
- return 0;
-}
-
-
-static int enable_flash_sc1100(struct pci_dev *dev, char *name)
-{
- uint8_t new;
-
- pci_write_byte(dev, 0x52, 0xee);
-
- new = pci_read_byte(dev, 0x52);
-
- if (new != 0xee) {
- printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x52, new, name);
- return -1;
- }
- return 0;
-}
-
-static int enable_flash_sis5595(struct pci_dev *dev, char *name)
-{
- uint8_t new, newer;
-
- new = pci_read_byte(dev, 0x45);
-
- /* clear bit 5 */
- new &= (~0x20);
- /* set bit 2 */
- new |= 0x4;
-
- pci_write_byte(dev, 0x45, new);
-
- newer = pci_read_byte(dev, 0x45);
- if (newer != new) {
- printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x45, new, name);
- printf("Stuck at 0x%x\n", newer);
- return -1;
- }
- return 0;
-}
-
-static int enable_flash_amd8111(struct pci_dev *dev, char *name)
-{
- /* register 4e.b gets or'ed with one */
- uint8_t old, new;
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- /* enable decoding at 0xffb00000 to 0xffffffff */
- old = pci_read_byte(dev, 0x43);
- new = old | 0xC0;
- if (new != old) {
- pci_write_byte(dev, 0x43, new);
- if (pci_read_byte(dev, 0x43) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x43, new, name);
- }
- }
-
- old = pci_read_byte(dev, 0x40);
- new = old | 0x01;
- if (new == old)
- return 0;
- pci_write_byte(dev, 0x40, new);
-
- if (pci_read_byte(dev, 0x40) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x40, new, name);
- return -1;
- }
- return 0;
-}
-
-//By yhlu
-static int enable_flash_ck804(struct pci_dev *dev, char *name)
-{
- /* register 4e.b gets or'ed with one */
- uint8_t old, new;
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- //dump_pci_device(dev);
-
- old = pci_read_byte(dev, 0x88);
- new = old | 0xc0;
- if (new != old) {
- pci_write_byte(dev, 0x88, new);
- if (pci_read_byte(dev, 0x88) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x88, new, name);
- }
- }
-
- old = pci_read_byte(dev, 0x6d);
- new = old | 0x01;
- if (new == old)
- return 0;
- pci_write_byte(dev, 0x6d, new);
-
- if (pci_read_byte(dev, 0x6d) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x6d, new, name);
- return -1;
- }
- return 0;
-}
-
-static int enable_flash_sb400(struct pci_dev *dev, char *name)
-{
- uint8_t tmp;
-
- struct pci_filter f;
- struct pci_dev *smbusdev;
-
- /* then look for the smbus device */
- pci_filter_init((struct pci_access *) 0, &f);
- f.vendor = 0x1002;
- f.device = 0x4372;
-
- for (smbusdev = pacc->devices; smbusdev; smbusdev = smbusdev->next) {
- if (pci_filter_match(&f, smbusdev)) {
- break;
- }
- }
-
- if(!smbusdev) {
- perror("smbus device not found. aborting\n");
- exit(1);
- }
-
- // enable some smbus stuff
- tmp=pci_read_byte(smbusdev, 0x79);
- tmp|=0x01;
- pci_write_byte(smbusdev, 0x79, tmp);
-
- // change southbridge
- tmp=pci_read_byte(dev, 0x48);
- tmp|=0x21;
- pci_write_byte(dev, 0x48, tmp);
-
- // now become a bit silly.
- tmp=inb(0xc6f);
- outb(tmp,0xeb);
- outb(tmp, 0xeb);
- tmp|=0x40;
- outb(tmp, 0xc6f);
- outb(tmp, 0xeb);
- outb(tmp, 0xeb);
-
- return 0;
-}
-
-//By yhlu
-static int enable_flash_mcp55(struct pci_dev *dev, char *name)
-{
- /* register 4e.b gets or'ed with one */
- unsigned char old, new, byte;
- unsigned short word;
-
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- //dump_pci_device(dev);
-
- /* Set the 4MB enable bit bit */
- byte = pci_read_byte(dev, 0x88);
- byte |= 0xff; //256K
- pci_write_byte(dev, 0x88, byte);
- byte = pci_read_byte(dev, 0x8c);
- byte |= 0xff; //1M
- pci_write_byte(dev, 0x8c, byte);
- word = pci_read_word(dev, 0x90);
- word |= 0x7fff; //15M
- pci_write_word(dev, 0x90, word);
-
- old = pci_read_byte(dev, 0x6d);
- new = old | 0x01;
- if (new == old)
- return 0;
- pci_write_byte(dev, 0x6d, new);
-
- if (pci_read_byte(dev, 0x6d) != new) {
- printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n",
- 0x6d, new, name);
- return -1;
- }
-
- return 0;
-
-}
-
-typedef struct penable {
- unsigned short vendor, device;
- char *name;
- int (*doit) (struct pci_dev * dev, char *name);
-} FLASH_ENABLE;
-
-static FLASH_ENABLE enables[] = {
- {0x1039, 0x0630, "SIS630", enable_flash_sis630},
- {0x8086, 0x7110, "PIIX4/PIIX4E/PIIX4M", enable_flash_piix4},
- {0x8086, 0x2410, "ICH", enable_flash_ich_4e},
- {0x8086, 0x2420, "ICH0", enable_flash_ich_4e},
- {0x8086, 0x2440, "ICH2", enable_flash_ich_4e},
- {0x8086, 0x244c, "ICH2-M", enable_flash_ich_4e},
- {0x8086, 0x2480, "ICH3-S", enable_flash_ich_4e},
- {0x8086, 0x248c, "ICH3-M", enable_flash_ich_4e},
- {0x8086, 0x24c0, "ICH4/ICH4-L", enable_flash_ich_4e},
- {0x8086, 0x24cc, "ICH4-M", enable_flash_ich_4e},
- {0x8086, 0x24d0, "ICH5/ICH5R", enable_flash_ich_4e},
- {0x8086, 0x2640, "ICH6/ICH6R", enable_flash_ich_dc},
- {0x8086, 0x2641, "ICH6-M", enable_flash_ich_dc},
- {0x8086, 0x27b0, "ICH7DH", enable_flash_ich_dc},
- {0x8086, 0x27b8, "ICH7/ICH7R", enable_flash_ich_dc},
- {0x8086, 0x27b9, "ICH7M", enable_flash_ich_dc},
- {0x8086, 0x27bd, "ICH7MDH", enable_flash_ich_dc},
- {0x8086, 0x2810, "ICH8/ICH8R", enable_flash_ich_dc},
- {0x8086, 0x2812, "ICH8DH", enable_flash_ich_dc},
- {0x8086, 0x2814, "ICH8DO", enable_flash_ich_dc},
- {0x1106, 0x8231, "VT8231", enable_flash_vt823x},
- {0x1106, 0x3177, "VT8235", enable_flash_vt823x},
- {0x1106, 0x3227, "VT8237", enable_flash_vt823x},
- {0x1106, 0x0686, "VT82C686", enable_flash_amd8111},
- {0x1078, 0x0100, "CS5530", enable_flash_cs5530},
- {0x100b, 0x0510, "SC1100", enable_flash_sc1100},
- {0x1039, 0x0008, "SIS5595", enable_flash_sis5595},
- {0x1022, 0x7468, "AMD8111", enable_flash_amd8111},
- // this fallthrough looks broken.
- {0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804}, // LPC
- {0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804}, // Pro
- {0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804}, // Slave, should not be here, to fix known bug for A01.
-
- {0x10de, 0x0260, "NVidia MCP51", enable_flash_ck804},
- {0x10de, 0x0261, "NVidia MCP51", enable_flash_ck804},
- {0x10de, 0x0262, "NVidia MCP51", enable_flash_ck804},
- {0x10de, 0x0263, "NVidia MCP51", enable_flash_ck804},
-
- {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, // Gigabyte m57sli-s4
- {0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0364, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55}, // LPC
- {0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55}, // Pro
-
- {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, // ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
-};
-
-static int mbenable_island_aruma(void)
-{
-#define EFIR 0x2e /* Extended function index register, either 0x2e or 0x4e */
-#define EFDR EFIR + 1 /* Extended function data register, one plus the index reg. */
- char b;
-
-/* Disable the flash write protect. The flash write protect is
- * connected to the WinBond w83627hf GPIO 24.
- */
-
- printf("Disabling mainboard flash write protection.\n");
-
- outb(0x87, EFIR); // sequence to unlock extended functions
- outb(0x87, EFIR);
-
- outb(0x20, EFIR); // SIO device ID register
- b = inb(EFDR);
- printf_debug("W83627HF device ID = 0x%x\n",b);
-
- if (b != 0x52) {
- perror("Incorrect device ID, aborting write protect disable\n");
- exit(1);
- }
-
- outb(0x2b, EFIR); // GPIO multiplexed pin reg.
- b = inb(EFDR) | 0x10;
- outb(0x2b, EFIR);
- outb(b, EFDR); // select GPIO 24 instead of WDTO
-
- outb(0x7, EFIR); // logical device select
- outb(0x8, EFDR); // point to device 8, GPIO port 2
-
- outb(0x30, EFIR); // logic device activation control
- outb(0x1, EFDR); // activate
-
- outb(0xf0, EFIR); // GPIO 20-27 I/O selection register
- b = inb(EFDR) & ~0x10;
- outb(0xf0, EFIR);
- outb(b, EFDR); // set GPIO 24 as an output
-
- outb(0xf1, EFIR); // GPIO 20-27 data register
- b = inb(EFDR) | 0x10;
- outb(0xf1, EFIR);
- outb(b, EFDR); // set GPIO 24
-
- outb(0xaa, EFIR); // command to exit extended functions
-
- return 0;
-}
-
-typedef struct mbenable {
- char *vendor, *part;
- int (*doit)(void);
-} MAINBOARD_ENABLE;
-
-static MAINBOARD_ENABLE mbenables[] = {
- { "ISLAND", "ARUMA", mbenable_island_aruma },
-};
-
-int enable_flash_write()
-{
- int i;
- struct pci_dev *dev = 0;
- FLASH_ENABLE *enable = 0;
-
- /* get io privilege access PCI configuration space */
-#if defined (__sun) && (defined(__i386) || defined(__amd64))
- if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0){
-#else
- if (iopl(3) != 0) {
-#endif
- perror("Can not set io privilege");
- exit(1);
- }
-
-
- /* Initialize PCI access */
- pacc = pci_alloc(); /* Get the pci_access structure */
- /* Set all options you want -- here we stick with the defaults */
- pci_init(pacc); /* Initialize the PCI library */
- pci_scan_bus(pacc); /* We want to get the list of devices */
-
-
- /* First look whether we have to do something for this
- * motherboard.
- */
- for (i = 0; i < sizeof(mbenables) / sizeof(mbenables[0]); i++) {
- if(lb_vendor && !strcmp(mbenables[i].vendor, lb_vendor) &&
- lb_part && !strcmp(mbenables[i].part, lb_part)) {
- mbenables[i].doit();
- break;
- }
- }
-
- /* now let's try to find the chipset we have ... */
- for (i = 0; i < sizeof(enables) / sizeof(enables[0]) && (!dev);
- i++) {
- struct pci_filter f;
- struct pci_dev *z;
- /* the first param is unused. */
- pci_filter_init((struct pci_access *) 0, &f);
- f.vendor = enables[i].vendor;
- f.device = enables[i].device;
- for (z = pacc->devices; z; z = z->next)
- if (pci_filter_match(&f, z)) {
- enable = &enables[i];
- dev = z;
- }
- }
-
- if (!enable) {
- printf("Warning: Unknown system. Flash detection "
- "will most likely fail.\n");
- return 1;
- }
-
- /* now do the deed. */
- printf("Enabling flash write on %s...", enable->name);
- if (enable->doit(dev, enable->name) == 0)
- printf("OK\n");
- return 0;
-}
Modified: trunk/LinuxBIOSv2/util/flashrom/flash_rom.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/flash_rom.c 2007-04-03 10:45:53 UTC (rev 2580)
+++ trunk/LinuxBIOSv2/util/flashrom/flash_rom.c 2007-04-04 22:45:58 UTC (rev 2581)
@@ -35,17 +35,70 @@
#include <string.h>
#include <stdlib.h>
#include <getopt.h>
+#include <pci/pci.h>
+/* for iopl */
+#if defined (__sun) && (defined(__i386) || defined(__amd64))
+#include <strings.h>
+#include <sys/sysi86.h>
+#include <sys/psw.h>
+#include <asm/sunddi.h>
+#endif
+
#include "flash.h"
#include "lbtable.h"
#include "layout.h"
#include "debug.h"
char *chip_to_probe = NULL;
-
+struct pci_access *pacc; /* For board and chipset_enable */
int exclude_start_page, exclude_end_page;
int force=0, verbose=0;
+/*
+ *
+ */
+struct pci_dev *
+pci_dev_find(uint16_t vendor, uint16_t device)
+{
+ struct pci_dev *temp;
+ struct pci_filter filter;
+
+ pci_filter_init(NULL, &filter);
+ filter.vendor = vendor;
+ filter.device = device;
+
+ for (temp = pacc->devices; temp; temp = temp->next)
+ if (pci_filter_match(&filter, temp))
+ return temp;
+
+ return NULL;
+}
+
+/*
+ *
+ */
+struct pci_dev *
+pci_card_find(uint16_t vendor, uint16_t device,
+ uint16_t card_vendor, uint16_t card_device)
+{
+ struct pci_dev *temp;
+ struct pci_filter filter;
+
+ pci_filter_init(NULL, &filter);
+ filter.vendor = vendor;
+ filter.device = device;
+
+ for (temp = pacc->devices; temp; temp = temp->next)
+ if (pci_filter_match(&filter, temp)) {
+ if ((card_vendor == pci_read_word(temp, 0x2C)) &&
+ (card_device == pci_read_word(temp, 0x2E)))
+ return temp;
+ }
+
+ return NULL;
+}
+
struct flashchip *probe_flash(struct flashchip *flash)
{
int fd_mem;
@@ -72,10 +125,11 @@
__FUNCTION__, flash->total_size * 1024,
(unsigned long) size);
}
+
bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED,
fd_mem, (off_t) (0xffffffff - size + 1));
if (bios == MAP_FAILED) {
- perror("Error: Can't mmap /dev/mem.");
+ perror("Error: Can't mmap " MEM_DEV ".");
exit(1);
}
flash->virt_addr = bios;
@@ -92,7 +146,7 @@
bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED,
fd_mem, (off_t) (0x9400000));
if (bios == MAP_FAILED) {
- perror("Error: Can't mmap /dev/mem.");
+ perror("Error: Can't mmap " MEM_DEV ".");
exit(1);
}
flash->virt_addr = bios;
@@ -281,6 +335,22 @@
if (optind < argc)
filename = argv[optind++];
+ /* First get full io access */
+#if defined (__sun) && (defined(__i386) || defined(__amd64))
+ if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0){
+#else
+ if (iopl(3) != 0) {
+#endif
+ fprintf(stderr, "ERROR: iopl failed: \"%s\"\n", strerror(errno));
+ exit(1);
+ }
+
+ /* Initialize PCI access for flash enables */
+ pacc = pci_alloc(); /* Get the pci_access structure */
+ /* Set all options you want -- here we stick with the defaults */
+ pci_init(pacc); /* Initialize the PCI library */
+ pci_scan_bus(pacc); /* We want to get the list of devices */
+
printf("Calibrating delay loop... ");
myusec_calibrate_delay();
printf("ok\n");
@@ -293,8 +363,14 @@
/* try to enable it. Failure IS an option, since not all motherboards
* really need this to be done, etc., etc.
*/
- (void) enable_flash_write();
+ ret = chipset_flash_enable();
+ if (ret == -2)
+ printf("WARNING: No chipset found. Flash detection "
+ "will most likely fail.\n");
+ board_flash_enable(lb_vendor, lb_part);
+
+
if ((flash = probe_flash(flashchips)) == NULL) {
printf("No EEPROM/flash device found.\n");
exit(1);
More information about the coreboot
mailing list