[LinuxBIOS] Ethernet problem with GeodeLX (db800) with running lxbios

[Juergen Beisert]

On Monday 03 September 2007 15:34, Steffen D. wrote:
> By the way:
>
> dmesg:
> PCI: Guessed IRQ 11 for device 0000:00:0d.0
> PCI: Sharing IRQ 11 with 0000:00:0f.3
> eth0: RTL8169sb/8110sb at 0xd0000000, 00:08:ee:00:ee:1c, IRQ 11
>
> lspci -v
> ...........
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
>         Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit
> Ethernet Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 I/O
> ports at 1000 [size=256]
>         Memory at fe019000 (32-bit, non-prefetchable) [size=256]
>         Expansion ROM at ffec0000 [disabled] [size=128K]
>         Capabilities: [dc] Power Management version 2

Can you also create such a text when you start your system with the regular 
BIOS?

And an "lspci -vvv" also. Might help to see the difference. Does the system 
behavior changes when you start your linux with the "irqpoll" kernel 
parameter?

Juergen