[LinuxBIOS] Fintek F71805

[Corey Osgood]

Uwe Hermann wrote:
> On Sun, Sep 23, 2007 at 08:45:22AM -0400, Corey Osgood wrote:
>   
>> root at sparehdd:~/superiotool# ./superiotool -d
>> Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e
>> No dump available for this Super I/O
>>
>> ???
>>     
>
> That's expected, the -d functionality is not yet implemented for
> the Fintek Super I/Os. You can add it if you want, it's just
> a huge list of registers and their defaults as per datasheet.
>   

I'll look at it if I get some time (not likely soon)

> Can you try -D, please? That _should_ work, but maybe I broke it.
>
>   

Yep, that works:

root at sparehdd:~/superiotool# ./superiotool -D
Found Fintek F71805 (vid=0x3419, id=0x0604) at port=0x4e
Fintek F71805
Flash write is disabled.
Flash control is 0x0008.
27=20
29=00
2a=ff
2b=ff
UART1 is enabled
UART1 base=03f8, irq=04, mode=RS232
UART2 is enabled
UART2 base=02f8, irq=03, mode=RS232
PARPORT is enabled
PARPORT base=0378, irq=07
HW monitor is enabled
HW monitor base=0295, irq=00
GPIO is enabled
GPIO 70=ff, e0=ff, e1=ff, e2=ff, e3=ff, e4=ff, e5=ff
GPIO e6=ff, e7=ff, e8=ff, e9=ff, f0=ff, f1=ff, f3=ff, f4=ff
GPIO f5=ff, f6=ff, f7=ff, f8=ff