[coreboot] r3556 - in trunk/coreboot-v2: src/mainboard/via/epia-cn src/northbridge/via/cn700 src/southbridge/via/vt8237r targets/via/epia-cn

svn at coreboot.org svn at coreboot.org
Mon Sep 1 03:48:08 CEST 2008


Author: stuge
Date: 2008-09-01 03:48:07 +0200 (Mon, 01 Sep 2008)
New Revision: 3556

Modified:
   trunk/coreboot-v2/src/mainboard/via/epia-cn/Config.lb
   trunk/coreboot-v2/src/mainboard/via/epia-cn/Options.lb
   trunk/coreboot-v2/src/mainboard/via/epia-cn/auto.c
   trunk/coreboot-v2/src/northbridge/via/cn700/raminit.c
   trunk/coreboot-v2/src/northbridge/via/cn700/vga.c
   trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r.c
   trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r_lpc.c
   trunk/coreboot-v2/targets/via/epia-cn/Config.lb
Log:
This patch gets the Epia-CN working without ACPI or APIC.

All devices work, no irq storms. Enjoy.

Signed-off-by: Bari Ari <bari at onelabs.com>
Acked-by: Peter Stuge <peter at stuge.se>


Modified: trunk/coreboot-v2/src/mainboard/via/epia-cn/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/via/epia-cn/Config.lb	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/mainboard/via/epia-cn/Config.lb	2008-09-01 01:48:07 UTC (rev 3556)
@@ -98,12 +98,14 @@
       register "ide0_80pin_cable" = "0"
       register "ide1_80pin_cable" = "0"
       device pci f.0 on end			# IDE
-      register "fn_ctrl_lo" = "0x8a"
-      register "fn_ctrl_hi" = "0x9d"
-      device pci 10.0 on end			# USB 1.1
-      device pci 10.1 on end			# USB 1.1
-      device pci 10.2 on end			# USB 1.1
-      device pci 10.3 on end			# USB 1.1
+      register "fn_ctrl_lo" = "0x80"
+      register "fn_ctrl_hi" = "0x1d"
+      device pci 10.0 on end			# OHCI
+      device pci 10.1 on end			# OHCI
+      device pci 10.2 on end			# OHCI
+      device pci 10.3 on end			# OHCI
+      device pci 10.4 on end			# EHCI
+      device pci 10.5 on end			# UDCI
       device pci 11.0 on			# Southbridge LPC
         chip superio/via/vt1211			# Super I/O
           device pnp 2e.0 off			# Floppy

Modified: trunk/coreboot-v2/src/mainboard/via/epia-cn/Options.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/via/epia-cn/Options.lb	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/mainboard/via/epia-cn/Options.lb	2008-09-01 01:48:07 UTC (rev 3556)
@@ -94,7 +94,7 @@
 default _RAMBASE = 0x00004000
 default CONFIG_ROM_PAYLOAD = 1
 default CROSS_COMPILE = ""
-default CC = "$(CROSS_COMPILE)gcc -m32"
+default CC = "$(CROSS_COMPILE)gcc -m32 -fno-stack-protector"
 default HOSTCC = "gcc"
 
 ##

Modified: trunk/coreboot-v2/src/mainboard/via/epia-cn/auto.c
===================================================================
--- trunk/coreboot-v2/src/mainboard/via/epia-cn/auto.c	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/mainboard/via/epia-cn/auto.c	2008-09-01 01:48:07 UTC (rev 3556)
@@ -55,34 +55,27 @@
 {
 	device_t dev;
 	u8 reg;
+ 
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+	if (dev == PCI_DEV_INVALID)
+		die("Southbridge not found!!!\n");
 
-	/*
-	 * If I enable SATA, FILO will not find the IDE disk, so I'll disable
-	 * SATA here. To not conflict with PCI spec, I'll move IDE device
-	 * from 00:0f.1 to 00:0f.0.
+	/* bit=0 means enable function (per CX700 datasheet)
+	 *   5 16.1 USB 2
+	 *   4 16.0 USB 1
+	 *   3 15.0 SATA and PATA
+	 *   2 16.2 USB 3
+	 *   1 16.4 USB EHCI
 	 */
-	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
-				PCI_DEVICE_ID_VIA_VT6420_SATA), 0);
-	if (dev != PCI_DEV_INVALID) {
-		/* Enable PATA. */
-		reg = pci_read_config8(dev, 0xd1);
-		reg |= 0x08;
-		pci_write_config8(dev, 0xd1, reg);
-		reg = pci_read_config8(dev, 0x49);
-		reg |= 0x80;
-		pci_write_config8(dev, 0x49, reg);
-	} else {
-		print_debug("No SATA device\r\n");
-	}
+	pci_write_config8(dev, 0x50, 0x80);
 
-	/* Disable SATA, and PATA device will be 00:0f.0. */
-	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
-				PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
-	if (dev == PCI_DEV_INVALID)
-		die("Southbridge not found!!!\r\n");
-	reg = pci_read_config8(dev, 0x50);
-	reg |= 0x08;
-	pci_write_config8(dev, 0x50, reg);
+	/* bit=1 means enable internal function (per CX700 datasheet)
+	 *   3 Internal RTC
+	 *   2 Internal PS2 Mouse
+	 *   1 Internal KBC Configuration
+	 *   0 Internal Keyboard Controller
+	 */
+	pci_write_config8(dev, 0x51, 0x1d);
 }
 
 static const struct mem_controller ctrl = {

Modified: trunk/coreboot-v2/src/northbridge/via/cn700/raminit.c
===================================================================
--- trunk/coreboot-v2/src/northbridge/via/cn700/raminit.c	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/northbridge/via/cn700/raminit.c	2008-09-01 01:48:07 UTC (rev 3556)
@@ -366,7 +366,7 @@
 	/* dram duty control */
 	pci_write_config8(ctrl->d0f3, 0xed, 0x10);
 
-	/* SMM and APIC deocoding, we donot use SMM */
+	/* SMM and APIC decoding, we do not use SMM */
 	reg = 0x29;
 	pci_write_config8(ctrl->d0f3, 0x86, reg);
 	/* SMM and APIC decoding mirror */

Modified: trunk/coreboot-v2/src/northbridge/via/cn700/vga.c
===================================================================
--- trunk/coreboot-v2/src/northbridge/via/cn700/vga.c	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/northbridge/via/cn700/vga.c	2008-09-01 01:48:07 UTC (rev 3556)
@@ -45,14 +45,12 @@
 	u8 reg8;
 
 	print_debug("Copying BOCHS Bios to 0xf000\n");
-/* Copy the BOCHs BIOS from 0xFFFFFFFF - ROM_SIZE - BOCHs size (64k) to 0xf0000
-   This is for compatibility with the VGA ROM's BIOS callbacks */
-	memcpy(0xf0000, (0xFFFFFFFF - ROM_SIZE - 0x10000), 0x10000);
+	/* Copy BOCHS BIOS from 4G-ROM_SIZE-64k (in flash) to 0xf0000 (in RAM)
+	 * This is for compatibility with the VGA ROM's BIOS callbacks */
+	memcpy(0xf0000, (0xffffffff - ROM_SIZE - 0xffff), 0x10000);
 
 	printk_debug("Initializing VGA\n");
 	
-	pci_write_config8(dev, 0x3c, 0xb);
-
 	/* Set memory rate to 200MHz */
 	outb(0x3d, CRTM_INDEX);
 	reg8 = inb(CRTM_DATA);
@@ -71,8 +69,6 @@
 	pci_write_config8(dev, 0x0d, 0x20);
 	pci_write_config32(dev,0x10, 0xf4000008);
 	pci_write_config32(dev,0x14, 0xfb000000);
-	pci_write_config8(dev, 0x3e, 0x02);
-	pci_write_config8(dev, 0x3c, 0x0a);
 	
 	
 	printk_debug("INSTALL REAL-MODE IDT\n");

Modified: trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r.c
===================================================================
--- trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r.c	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r.c	2008-09-01 01:48:07 UTC (rev 3556)
@@ -79,8 +79,6 @@
 	pci_write_config8(dev, 0x51, sb->fn_ctrl_hi);
 
 	/* TODO: If SATA is disabled, move IDE to fn0 to conform PCI specs. */
-	/* Extend ROM decode to 1MB FFC00000 - FFFFFFFF */
-	pci_write_config8(dev, 0x41, 0x7f);
 }
 
 struct chip_operations southbridge_via_vt8237r_ops = {

Modified: trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r_lpc.c
===================================================================
--- trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r_lpc.c	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/src/southbridge/via/vt8237r/vt8237r_lpc.c	2008-09-01 01:48:07 UTC (rev 3556)
@@ -244,10 +244,20 @@
 	enables |= 0x80;
 	pci_write_config8(dev, 0x6C, enables);
 
-	/* FIXME: Map 4MB of flash into the address space,
-	 * this should be in CAR call.
+	/*
+	 * ROM decode
+	 * bit range
+	 *   7 000E0000h-000EFFFFh
+	 *   6 FFF00000h-FFF7FFFFh
+	 *   5 FFE80000h-FFEFFFFFh
+	 *   4 FFE00000h-FFE7FFFFh
+	 *   3 FFD80000h-FFDFFFFFh
+	 *   2 FFD00000h-FFD7FFFFh
+	 *   1 FFC80000h-FFCFFFFFh
+	 *   0 FFC00000h-FFC7FFFFh
+	 * So 0x7f here sets ROM decode to FFC00000-FFFFFFFF or 4Mbyte.
 	 */
-	/* pci_write_config8(dev, 0x41, 0x7f); */
+	pci_write_config8(dev, 0x41, 0x7f);
 
 	/* Set bit 6 of 0x40 (I/O recovery time).
 	 * IMPORTANT FIX - EISA = ECLR reg at 0x4d0! Decoding must be on so
@@ -271,8 +281,14 @@
 	/* ROM memory cycles go to LPC. */
 	pci_write_config8(dev, 0x59, 0x80);
 
-	/* Bypass APIC De-Assert Message, INTE#, INTF#, INTG#, INTH# as PCI. */
-	pci_write_config8(dev, 0x5B, 0xb);
+	/*
+	 * bit meaning
+	 *   3 Bypass APIC De-Assert Message (1=Enable)
+	 *   1 possibly "INTE#, INTF#, INTG#, INTH# as PCI"
+	 *     bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
+	 *   0 Dynamic Clock Gating Main Switch (1=Enable)
+	 */
+	pci_write_config8(dev, 0x5b, 0x9);
 
 	/* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */
 	pci_write_config8(dev, 0x48, 0x8c);

Modified: trunk/coreboot-v2/targets/via/epia-cn/Config.lb
===================================================================
--- trunk/coreboot-v2/targets/via/epia-cn/Config.lb	2008-08-31 22:10:35 UTC (rev 3555)
+++ trunk/coreboot-v2/targets/via/epia-cn/Config.lb	2008-09-01 01:48:07 UTC (rev 3556)
@@ -22,6 +22,13 @@
 target via_epia_cn
 mainboard via/epia-cn
 
+option MAXIMUM_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=8
+option CONFIG_CONSOLE_SERIAL8250=1
+
+# coreboot C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
 #
 # Generate the final ROM like this:
 # cat vgabios bochsbios coreboot.rom > coreboot.rom.final





More information about the coreboot mailing list