[coreboot] r1143 - coreboot-v3/arch/x86
svn at coreboot.org
svn at coreboot.org
Thu Mar 5 06:48:43 CET 2009
Author: rminnich
Date: 2009-03-05 06:48:43 +0100 (Thu, 05 Mar 2009)
New Revision: 1143
Modified:
coreboot-v3/arch/x86/secondary.S
Log:
This is working up to the ljmpl to protected mode. It has all the
debugging in, using locations 0 and _secondary_start as POST.
Calling from initram did not work out, as we have to disable_car in initram
to make such a call work (on core2). For now,
I am calling this from stage1_phase 3, before stage2 is called. But that
has increased the code size of stage1, which is not a great idea.
What I am thinking we ought to do: call this from stage2, before phase 1,
so that CPUs are nice and set up and quiet.
Provide phase2 with an SMP-safe printk.
This is here so others may see it and correct my work. The good news is
that SMP startup on core2 on v3 is now starting to go. But the better news
is that the way this is working is pretty generic and ought to apply to
much more than just core2.
To really look at object you might want to get ndisasm.
Signed-off-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Modified: coreboot-v3/arch/x86/secondary.S
===================================================================
--- coreboot-v3/arch/x86/secondary.S 2009-03-01 19:23:02 UTC (rev 1142)
+++ coreboot-v3/arch/x86/secondary.S 2009-03-05 05:48:43 UTC (rev 1143)
@@ -28,28 +28,52 @@
.code16
.balign 4096
cli
- movl $1b, %ebx
+ movw $0xdead, 0
+ movw $0xbeef, 2
xorl %eax, %eax
movl %eax, %cr3 /* Invalidate TLB*/
/* On hyper threaded cpus, invalidating the cache here is
* very very bad. Don't.
*/
+ movw $0, 0
+ movl $1b, %ebx
+ movw $1, 0
+ movw $2, 0
/* setup the data segment */
movw %cs, %ax
+ movw %ax, 2
+ movw $3, 0
movw %ax, %ds
+ movw $4, 0
+ /* past this point, "0" means ds:0, i.e. cs:0, or the
+ * segment part of the address.
+ */
data32 lgdt gdtaddr - _secondary_start
+// data32 lgdt %cs:gdtptr
+ movw $5, 0
movl %cr0, %eax
+ movw $6, 0
andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
+ movw $7, 0
orl $0x60000001, %eax /* CD, NW, PE = 1 */
+ movw $8, 0
movl %eax, %cr0
+ movw $9, 0
+ hlt
+ /* tested to this point but not past it */
- ljmpl $0x10, $1f
+ /* I am pretty sure this just jumps back into
+ * ROM; it's an abs jump
+ */
+ data32 ljmp $0x10, $secondary32
+ movw $0xa, 0
1:
.code32
secondary32:
+ hlt
movw $0x18, %ax
movw %ax, %ds
movw %ax, %es
More information about the coreboot
mailing list