Nvidia CK804 Porting Notes: Difference between revisions
Jump to navigation
Jump to search
(some information collected about the CK804) |
(No difference)
|
Revision as of 00:10, 26 February 2008
This document does not (at present) attempt to be as complete as the AMD_Geode_Porting_Guide, which has more general information.
Documentation
There is no publicly available documentation on the CK804, the source (and, of course, reverse engineering) is your only hope.
Audio and Network
If your CK804 has an AC97 codec, or ethernet PHY connected to it, you'll probably want to define CK804_USE_ACI and CK804_USE_NIC respectively.
Without CK804_USE_ACI=1, the audio driver will time out when attempting to communicate with the codec.
Interrupt Routing Registers
Obtained via playing with these registers with setpci(8). Some information is still missing.
This table maps nibble values of these registers to APIC pin numbers.
These registers are in the LPC bridge configuration space.
nibble | pin |
---|---|
1h | 23 |
2h | 22? |
8h | 20 |
Ch | 12 |
Dh | 21 |
Eh | 14 |
Fh | 15 |
bits | description |
---|---|
27:24 | SATA at device 7, second port |
23:20 | SATA at device 8, second port |
15:0 | PCI IRQ mappings? |
bits | description |
---|---|
31:28 | SATA at device 7, first port |
27:24 | SATA at device 8, first port |
15:12 | EHCI (device 2, function 1) |
bits | description |
---|---|
11:8 | NIC (device 10, function 0) |
3:0 | OHCI (device 2, function 0) |