Board:cubietech/cubieboard: Difference between revisions
No edit summary |
(→TODOs) |
||
Line 3: | Line 3: | ||
== TODOs == | == TODOs == | ||
* Integrate mksunxiboot into our buildsystem | * <s>Integrate mksunxiboot into our buildsystem</s> [http://review.coreboot.org/4656 Ready for submission] | ||
* Figure out how to move bootblock and CBFS header to make room for BOOT0 header. | * Figure out how to move bootblock and CBFS header to make room for BOOT0 header. | ||
* Figure out the whole MMC/blockdev/NAND shenanigance | * Figure out the whole MMC/blockdev/NAND shenanigance |
Revision as of 05:37, 11 January 2014
Whoa! Slow down cowboy! Go review, then come back.
TODOs
Integrate mksunxiboot into our buildsystemReady for submission- Figure out how to move bootblock and CBFS header to make room for BOOT0 header.
- Figure out the whole MMC/blockdev/NAND shenanigance
Build
STOP RIGHT HERE!!!! Before anything, make sure you have the latest code, or the latest development code.
Build prerequisites
mksunxiboot
Deprecated: mksunxi boot is integrated into the coreboot buidsystem.
The BROM will only load our bootblock, if it finds a signature, and a correct checksum. These are currently added with mxsunxiboot. The source is available from sunxi uboot. Since this tool is not yet integrated into our build system, the build will silently fail to produce a bootable image if mksunxiboot is not in PATH. .
Payload
There are not many ARM payloads that can do anything useful. One possibly useful payload is sunxi/u***t. Here, we are interested in the payload part, not hwinit part (SPL). Once you have succesfully built sunxi/u***t, add the resulting "u-boot" file as the coreboot payload. This is an elf file that coreboot can easily load.
Installation
Counter to the usual way of doing things, the bootable coreboot image resides in build/BOOT0. This image needs to be placed on the SD card at an offset of 8 KiB. This is a limitation on how the CPU loads the bootblock, and there's nothing we can do about it.
# dd if=build/BOOT0 of=/path/to/sdcard/blockdev bs=1024 seek=8
This is enough to get coreboot up and running.