Coreinfo: Difference between revisions
m (→libpayload) |
|||
Line 16: | Line 16: | ||
The coreinfo payload uses [[libpayload]], thus you need to get that first and build it: | The coreinfo payload uses [[libpayload]], thus you need to get that first and build it: | ||
$ '''svn co svn://coreboot.org/coreboot/trunk/payloads/libpayload''' | |||
$ '''cd libpayload''' | |||
$ '''svn co svn://coreboot.org/coreboot/trunk/payloads/libpayload | |||
$ '''cd libpayload | |||
$ '''make menuconfig''' | $ '''make menuconfig''' | ||
$ '''make | $ '''make install''' | ||
=== coreinfo === | === coreinfo === |
Revision as of 14:53, 5 August 2010
coreinfo is a small informational payload for coreboot. Currently, it can display CPU information, PCI information, coreboot table information, and show an NVRAM dump.
Screenshots
-
CPU info
-
PCI info
-
coreboot table
-
NVRAM dump
-
RAM dump
Building coreinfo
libpayload
The coreinfo payload uses libpayload, thus you need to get that first and build it:
$ svn co svn://coreboot.org/coreboot/trunk/payloads/libpayload $ cd libpayload $ make menuconfig $ make install
coreinfo
You can then get coreinfo itself and build it:
$ cd .. $ svn co svn://coreboot.org/coreboot/trunk/payloads/coreinfo $ cd coreinfo $ make menuconfig $ make
The file build/coreinfo.elf is your final coreinfo payload which you can use with coreboot (v2 or v3), either on real hardware or in a QEMU image.
coreboot
Finally, you have to build coreboot (v3 in this example) with coreinfo as payload:
$ cd .. $ svn co svn://coreboot.org/repository/coreboot-v3 $ cp coreinfo/build/coreinfo.elf coreboot-v3/payload.elf $ cd coreboot-v3 $ make menuconfig
Now enter the Payload menu and select Payload type and then An ELF executable payload file. Now exit the menu, save your settings, and build coreboot:
$ make
The file build/coreboot.rom (or build/bios.bin) is your final coreboot v3 image, which also contains the coreinfo payload.
Running coreinfo in QEMU
For running coreboot+coreinfo image in QEMU, you need a patched version of vgabios-cirrus.bin in your build directory first:
$ cd build $ wget http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip $ unzip Vgabios-cirrus.zip $ cd ..
You can now run coreinfo in QEMU:
$ qemu -L build -hda /dev/zero -serial stdio
Ready-made coreinfo QEMU image
If you don't want to build libpayload, coreinfo, and coreboot from source, you can also use the ready-made coreinfo QEMU image by following the instructions on that page.
![]() |
I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.
In case this is not legally possible: |