Difference between revisions of "Board:asus/m4a785t-m"
From coreboot
(→Building the serial port adapter) |
(→Building the serial port adapter) |
||
Line 116: | Line 116: | ||
[[Image:ASUS_M4A785T-M_serial_connector_witout_serial_adapter.jpeg]] | [[Image:ASUS_M4A785T-M_serial_connector_witout_serial_adapter.jpeg]] | ||
And here's the kind of cable you will need: | And here's the kind of cable you will need: | ||
− | [[Image:ASUS_M4A785T- | + | [[Image:ASUS_M4A785T-M_serial_connector_with_serial_adapter.jpeg]] |
== Building Coreboot == | == Building Coreboot == |
Revision as of 11:37, 15 February 2012
Contents
Status
Device/functionality | Status | Comments | ||||||
---|---|---|---|---|---|---|---|---|
CPU | ||||||||
CPU works | OK | Tested: AMD Athlon64 X2 250. | ||||||
L1 cache enabled | Untested | Not tested yet | ||||||
L2 cache enabled | Untested | Not tested yet | ||||||
L3 cache enabled | N/A | |||||||
Multiple CPU support | N/A | |||||||
Multi-core support | OK | |||||||
Hardware virtualization | Untested | Not tested yet | ||||||
RAM | ||||||||
EDO | N/A | |||||||
SDRAM | N/A | |||||||
SO-DIMM | N/A | |||||||
DDR | N/A | N/A | ||||||
DDR2 | Untested | |||||||
DDR3 | OK | 2G works. | ||||||
Dual channel support | Untested | |||||||
ECC support | Untested | |||||||
On-board Hardware | ||||||||
On-board IDE 3.5" | OK | Tested: 500GB HDD | ||||||
On-board IDE 2.5" | N/A | |||||||
On-board SATA | OK | Tested on port 1, untested for the rest | ||||||
On-board SCSI | Unknown | |||||||
On-board USB | OK | USB keyboard works | ||||||
On-board VGA | WIP | Tested:analog VGA and HDMI. screen flickers at high resolutions | ||||||
On-board Ethernet | Untested | |||||||
On-board Audio | No | Linux driver crashes. | ||||||
On-board Modem | N/A | |||||||
On-board FireWire | N/A | |||||||
On-board Smartcard reader | N/A | |||||||
On-board CompactFlash | N/A | |||||||
On-board PCMCIA | N/A | |||||||
On-board Wifi | N/A | |||||||
On-board Bluetooth | N/A | |||||||
On-board SD card reader | N/A | |||||||
Add-on slots/cards | ||||||||
ISA add-on cards | N/A | |||||||
Audio/Modem-Riser (AMR/CNR) cards | N/A | |||||||
PCI add-on cards | OK | I've an ath9k wifi PCI card and it works. | ||||||
Mini-PCI add-on cards | N/A | |||||||
Mini-PCI-Express add-on cards | Unknown | |||||||
PCI-X add-on cards | N/A | |||||||
AGP graphics cards | N/A | |||||||
PCI Express x1 add-on cards | Untested | |||||||
PCI Express x2 add-on cards | N/A | |||||||
PCI Express x4 add-on cards | Untested | |||||||
PCI Express x8 add-on cards | N/A | |||||||
PCI Express x16 add-on cards | Untested | |||||||
PCI Express x32 add-on cards | N/A | |||||||
HTX add-on cards | N/A | |||||||
Legacy / Super I/O | ||||||||
Floppy | N/A | There is no floppy connector at all. | ||||||
Serial port 1 (COM1) | OK | COM1 is only pin header on board. DB-9 serial connector is available, but not included with board. | ||||||
Serial port 2 (COM2) | N/A | |||||||
Parallel port | Untested | No connector, pins on board only | ||||||
PS/2 keyboard | OK | |||||||
PS/2 mouse | Untested | |||||||
Game port | N/A | |||||||
Infrared | N/A | |||||||
PC speaker | Untested | |||||||
DiskOnChip | N/A | |||||||
Input | ||||||||
Trackpoint | N/A | |||||||
Touchpad | N/A | |||||||
Fn Hotkeys | N/A | |||||||
Fingerprint Reader | N/A | |||||||
Laptop | ||||||||
Docking VGA | N/A | |||||||
Docking LAN | N/A | |||||||
Docking USB | N/A | |||||||
Docking Audio | N/A | |||||||
Docking Displayport | N/A | |||||||
Thinklight | N/A | |||||||
Webcam | N/A | |||||||
Miscellaneous | ||||||||
Sensors / fan control | Untested | |||||||
Hardware watchdog | N/A | |||||||
SMBus | Unknown | |||||||
CAN bus | N/A | |||||||
CPU frequency scaling | Untested | |||||||
Other powersaving features | Untested | |||||||
ACPI | Untested | |||||||
Reboot | OK | |||||||
Poweroff | OK | |||||||
Suspend | Unknown | |||||||
Nonstandard LEDs | ||||||||
High precision event timers (HPET) | ||||||||
Random number generator (RNG) | Untested | |||||||
Wake on modem ring | Untested | |||||||
Wake on LAN | ||||||||
Wake on keyboard | Untested | |||||||
Wake on mouse | Untested | |||||||
TPM | Unknown | |||||||
Flashrom | OK | The chip is SPI |
Introduction
This pages is about the port to the M4A785T-M, this mainboard is very similar to the M4A785-M, but:
- it has DDR3 instead of DDR2
The port is in the very early stages...(it will be ok when screen will not flickers at resolutions > 800x600)
Building the serial port adapter
You'll need to build a serial port adapter to get the coreboot logs during.
Here's a picture of the serial port connector on the mainboard:
And here's the kind of cable you will need:
Building Coreboot
To build coreboot for this mainboard:
- checkout coreboot revision 7916f4cef62bf032af86368a9df45db833d09b79
- revert the following commit: 8660a1aa56caeb31bfaf15464285ca650638515e
- git am the following patches:
Adapting GNU/Linux
- blacklist the snd-hda* modules