Board:emulation/spike-riscv: Difference between revisions

From coreboot
Jump to navigation Jump to search
(Build instructions)
Line 50: Line 50:
* apply the same coreboot patches as above, and select <tt>Emulation</tt>/<tt>Spike ucb riscv</tt>
* apply the same coreboot patches as above, and select <tt>Emulation</tt>/<tt>Spike ucb riscv</tt>
* in the Payload menu of <code>menuconfig</code>, select "ELF Payload" and enter the path to the bbl binary
* in the Payload menu of <code>menuconfig</code>, select "ELF Payload" and enter the path to the bbl binary
 
* run <code>make</code> and the <code>make-spike-elf.sh</code> script as described above
Block devices currently missing


===boot log===
===boot log===

Revision as of 23:29, 29 June 2016

SPIKE is RISC-V's primary emulator. The Spike support in coreboot is mostly being developed by jn as part of his GSoC 2016.

Build instructions

These instructions may easily become out of date as coreboot or RISC-V moves forward. If that happens, please complain on the discussion page or IRC (or just fix it).

Building the toolchain

  • clone the coreboot git repository
  • download and apply this patch and this patch.
  • run make crossgcc-riscv and a have a cup of $BEVERAGE

Building spike

Building coreboot without a payload

  • TODO: patch patch patch
  • run make menuconfig and select Emulation/SPIKE ucb riscv from the Mainboard menu
  • run make
  • run util/riscvtools/make-spike-elf.sh build/coreboot.rom build/coreboot.elf to create an ELF file (spike can only load ELF files)
  • run spike build/coreboot.elf

For general spike usage, look at its GitHub page.

Building Linux

  • git clone https://github.com/riscv/riscv-linux
  • download linux 4.6.x from kernel.org
  • cd linux-4.6.x/arch; ln -s ../../riscv-linux/arch/riscv .
  • make ARCH=riscv defconfig
  • make ARCH=riscv menuconfig, configure General setup/Cross-compiler tool prefix
  • make ARCH=riscv

Building bbl

  • TODO: libc stuff
  • TODO: payload linker script foo
  • TODO: patching the console output handler
  • mkdir build
  • cd build; ../configure --with-payload=path/to/vmlinux CC=path/to/riscv64-unknown-elf-gcc LD=path/to/riscv64-unknown-elf-ld
  • make

Building coreboot with bbl

  • apply the same coreboot patches as above, and select Emulation/Spike ucb riscv
  • in the Payload menu of menuconfig, select "ELF Payload" and enter the path to the bbl binary
  • run make and the make-spike-elf.sh script as described above

boot log

TODO