Difference between revisions of "Board:gigabyte/m57sli"
Jump to navigation
Jump to search
| Line 397: | Line 397: | ||
(that's assuming the image is called linuxbios.rom; if you used buildrom it would be called gigabyte-m57sli.rom and live in the 'deploy' subdirectory). | (that's assuming the image is called linuxbios.rom; if you used buildrom it would be called gigabyte-m57sli.rom and live in the 'deploy' subdirectory). | ||
''' | '''IF YOU ARE USING REVISION 3087 or older: note'''': You should upgrade to 3088 or higher. In prior releases, on the revision v2.0 of the motherboard there was an issue with the decoding of the I/O addresses into the LPC bridge of the MCP55 southbridge. It occurred only after booting with coreboot (the factory BIOS didn't have this issue). It prevented flashrom to access correctly the SPI interface of the ITE IT8716F chip, thus no reflashing was possible after a first burn of coreboot (without modchip). This issue was fixed and a full coreboot patch is on the tracks. There is also a workaround for the actual release of coreboot: before using flashrom after booting with coreboot, execute the commands: | ||
setpci -s 00:01.0 a0.l=70000001 | setpci -s 00:01.0 a0.l=70000001 | ||