From coreboot
Revision as of 13:23, 7 July 2017 by Siro (talk | contribs)
Jump to navigation Jump to search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to Contributions welcome!


Intel_Native_Raminit has it's own status page.


  • yellow USB port isn't powered in power-off state.
  • for i7 / Discrete GPU model - DisplayPort only connected to Discrete GPU -> does not work
  • Boot time issues after reboot (keyboard rest timeout)
  • ultrabay hot plug (event missing?)
  • some power management states missing?
  • windows not supported

Proprietary Components Status

  • CPU Microcode
  • FDT(Flash Descriptor Table) => Always needed
  • ME(Management Engine) => you do not have to touch it(just leave it where it is)
  • GbE(Gigabit Ethernet embedded mac) => you do not have to touch it(just leave it where it is)


{{ #if: | * [{{{review_url}}} The code has been merged into coreboot master]: | * The code has been merged into coreboot master:}}

 $ git clone

Building Firmware

Please have a look at Intel_Sandybridge_Build_Tutorial.


The flash chip can be a 8MB SOIC8 (Macronix MX25L6436EM2I / MX25L6406EM2I / Winbond W25Q64CVS) or WSON8 (Numonyx M25PX64).

Vendor firmware locks the flash and so you need to flash externally (unless until someone figures out a way around it). Lenovo firmware uses "protected regions" to protect the bootblock.