The wiki is being retired!
Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!
Some more information on the board is available in the mailing list archives.
So far we have verified that revision 1.0 of the mainboard has a socketed PLCC32 ROM chip (512KB).
If you have any other revision of the board, please contact us on the mailing list and let us know if it has a socketed (and PLCC-type) ROM chip.
|CPU works||OK||I'm using an AMD Athlon 64 X2 Dual Core Processor 3600+, both cores work fine.|
|L1 cache enabled||Unknown|
|L2 cache enabled||Unknown|
|L3 cache enabled||Unknown|
|Multiple CPU support||Unknown|
|DDR2||OK||It seems some combinations of DIMMs and RAM slots don't work. Using only one DIMM (in slot 1) works for me.|
|Dual channel support||Unknown|
|On-board IDE 3.5"||OK|
|On-board IDE 2.5"||Unknown|
|On-board SATA||OK||Tested with a 40 GB SATA disk, connected to the "SATA1" connector of the board (there are four). Works with hde2:/vmlinuz initrd=/initrd.img root=/dev/sda2 in FILO (my Linux partition is /dev/sda2). Mounting the drive also works fine when you don't boot from SATA (e.g. from IDE or via etherboot).|
|On-board USB||OK||Tested: USB thumb drive, USB keyboard, USB webcam, USB DVB-T adapter.|
|On-board Smartcard reader||N/A|
|On-board SD card reader||N/A|
|ISA add-on cards||Unknown|
|Audio/Modem-Riser (AMR/CNR) cards||Unknown|
|PCI add-on cards||OK||There were some problems with PCI add-on cards, but they're fixed as of svn revision 2807. Tested using a PCI VGA add-on card, X11 works fine.|
|Mini-PCI add-on cards||Unknown|
|Mini-PCI-Express add-on cards||Unknown|
|PCI-X add-on cards||Unknown|
|AGP graphics cards||Unknown|
|PCI Express x1 add-on cards||Unknown|
|PCI Express x2 add-on cards||Unknown|
|PCI Express x4 add-on cards||Unknown|
|PCI Express x8 add-on cards||Unknown|
|PCI Express x16 add-on cards||Unknown|
|PCI Express x32 add-on cards||Unknown|
|HTX add-on cards||Unknown|
|Legacy / Super I/O|
|Serial port 1 (COM1)||OK|
|Serial port 2 (COM2)||N/A|
|Sensors / fan control||OK||The k8temp module loads fine, the sensors tool outputs the CPU temperature (both cores in my case) correctly.|
|CPU frequency scaling||OK||Probably won't work as long as there's no ACPI implementation for this board(?)|
|Other powersaving features||Unknown|
|High precision event timers (HPET)||Unknown|
|Random number generator (RNG)||Unknown|
|Wake on modem ring||Unknown|
|Wake on LAN||Unknown|
|Wake on keyboard||Unknown|
|Wake on mouse||Unknown|
|Flashrom||OK||Currently Flashrom works fine with LinuxBIOS, but it does not yet work with the proprietary BIOS.|
$ cp payload.file /tmp/filo.elf
Build the LinuxBIOS image, containing the payload.
$ cd LinuxBIOSv2/targets $ ./buildtarget msi/ms7260 $ cd msi/ms7260/ms7260 $ make
Write the LinuxBIOS image onto your ROM chip using flashrom:
$ flashrom -wv linuxbios.rom
Note: At the moment flashrom does not work in the MS-7260 (when booted using the original BIOS). Thus, I'm flashing the ROM chip in a different mainboard where flashrom works. However, flashrom works just fine once the MS-7260 is booted using LinuxBIOS.
- Test the devices marked as "Untested" in the above status table.
- Fix flashrom to also work when the board is booted using the proprietary BIOS.
|This work is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This work is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.|